ROD AS 4495435 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Start By:
Connect the steering frame lock.
Release the hydraulic system pressure.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" and Operation and Maintenance Manual, "Capacities (Refill)" for the correct draining and filling procedures.
Illustration 1 g02332319
Remove covers (1).
Illustration 2 g02332335
Disconnect hose assembly (2) and hose (3).
Illustration 3 g02332355
Attach Tooling (A) and a suitable lifting device to right side fuel tank (4). The weight of right side fuel tank (4) is approximately 125 kg (275 lb).
Illustration 4 g02332373
Remove four bolts (5) and remove right side fuel tank (4).Installation Procedure
Install right side fuel tank (4) in the reverse order of the removal procedure.