ROD 4E7817 - Caterpillar

Introduction
This Special Instruction provides the necessary information for ordering parts and the necessary information for installing a retractable seat belt. The retractable seat belt can only be installed with the 122-4620 Seat Group or the 122-4622 Seat Group . Do not perform any procedure that is outlined in this publication or do not order parts until you understand the information that is contained in this document.Necessary Parts
Table 1
Seat Belt and Mounting Hardware    
Qty     Part No.     Description    
1     122-4617     Seat Belt Group (1)    
1     8T-5360     Washer    
1     1A-4350     Bolt    
1     4D-6432     Locknut    
1     8Y-5953     Bolt    
( 1 ) All necessary parts for installation of the seat belt are contained in the seat belt group .Installation Procedure
The seat belt should be installed with the buckle of the seat belt on the left side of the seat. Use the 8T-5360 Washer and the 8Y-5953 Bolt to install the seat belt with the buckle. Tighten the bolt to a torque of 75 15 N m (55 11 lb ft). The seat belt with the retractor will be installed on the right side of the seat. Use the 1A-4350 Bolt and the 4D-6432 Locknut to install the seat belt with the retractor. Tighten the bolt to a torque of 75 15 N m (55 11 lb ft).
After tightening the 1A-4350 Bolt to the correct torque, install the plastic cap over the bolt.