AVSPARE.COM
parts catalog

ROD AS 5106466 - Caterpillar


5106466 ROD AS Caterpillar parts
Rating:
61
Alternative (cross code) number:
CA5106466
510-6466
5106466
Caterpillar 5106466 ROD AS
Weight: 26 pounds 12 kg.

Buy ROD AS 5106466 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 15
  For full view, you need register

Information:


Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01119883
Raise the temperature of bearing (23). Install bearing (23) on shaft assembly (14) .
Install spacer (24) on shaft assembly (14) .
Use Tooling (C) to install retaining ring (25) onto shaft assembly (14) .
Illustration 2 g01120434
Raise the temperature of bearing (22). Install bearing (22) on shaft assembly (14) .
Illustration 3 g01120052
Use Tooling (A) and a suitable press to install seal (21) into body assembly (17) .
Illustration 4 g01119871
Install shaft assembly (14) into body assembly (17) .
Use Tooling (B) to install retaining ring (20) into body assembly (17) .
Illustration 5 g01119869
Install seal (19) onto shaft assembly (14) .
Illustration 6 g01120060
Use Tooling (A) and a suitable press to install seal (18) into housing (8) .
Illustration 7 g01119864
Note: Align the marks on body assembly (17) and housing (8) before you install bolts (16) .
Carefully install housing (8) on body assembly (17). Install bolts (16). Tighten bolts (16) to a torque of 55 N m (41 lb ft).
Illustration 8 g01119860
Install seal assembly (15) onto shaft assembly (14) .
Illustration 9 g01119842
Illustration 10 g01120099
Install washer (13) .
Use Tooling (C) to install retaining ring (12) .
Install wear plate (11) and quad ring seal (10) into housing (8) .
Apply Tooling (F) to the outer surface of cam liner (9) and the pin. Position cam liner (9) together and install the pin.
Install cam liner (9) into housing (8). Make sure that the pin is aligned with the notch in the bottom of housing (8) .
Illustration 11 g01119837
Note: Apply a non-petroleum based lubricant to the impeller before installation.
Install impeller (6) on the shaft. Install quad ring seal (7) .
Illustration 12 g01119793
Install bracket (5) and gear (4) .
Install cover (2) .
Install elbow (3) and elbow (1) .End By: Install the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Install".

Caterpillar parts catalog:

Caterpillar parts catalog
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine


Parts rod Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.