ROD ASSEM. 5J8630 - Caterpillar

Illustration 1 g03117876
Table 1
Specification for 384-4705 Fuel Injection Pump Gp
Item Qty Part Specification Description
Prior to installation of the fuel injector group, lubricate the bore in the cylinder head with 1P-0808 Multipurpose Grease. Use injector clamp (3) to press the injector into the bore. Do not tap on the top surface of the injector.
1 1 361-9354 Fuel Injection Valve Assembly Use the following procedure in order to tighten the fuel injection valve assembly:
Before assembly, lubricate the bore and the threads with 1P-0808 Multipurpose Grease.
1. Tighten the valve assembly to 35 N m (26 lb ft).
2. Turn to reach the final turn angle of 19 1 degrees.
3. Again, tighten to 115 to 290 N m (85 to 214 lb ft).
2 1 7F-8698 Bolt Torque to 65 7 N m (48 5 lb ft).
A - - Timing dimension is 64.34 0.20 mm (2.533 0.008 inch)
3 1 230-9456 Unit Injector Nozzle Use the following procedure in order to tighten the unit injector nozzle:
1. Tighten the unit injector nozzle to 30 N m (266 lb in).
2. Turn to reach the final turn angle of 58 2 degrees.
3. Again, tighten to 180 to 340 N m (133 to 251 lb ft).