ROD 5V6411 - Caterpillar

Dual Hopper & Apron Mode
Illustration 46 g01357654
The dual hopper & apron mode has two settings ON and OFF. Use keys (5) and (6) in order to scroll through the control list. Highlight the "Dual Hopper Mode & Apron" and press the ok key (9) in order to change the selection and accept the selection.The operator may configure the apron fold switch to work in conjunction with the hopper raise and lower switch. When dual hopper & apron mode is on, and in dual hopper mode, the apron raise switch will raise both the hoppers and the apron. The apron will start to raise about 1.0 second after the hoppers start to raise. Use the apron switch to lower both the hoppers and the apron simultaneously. When dual hopper & apron mode is off, the switches work independently from the hopper raise and lower switches.Raise Lock De-Act. SW Pos.
See "Hot Keys" for information concerning the "Screed Lift Lock Control Key".
Illustration 47 g01357654
The "Raise Lock De-Act. SW Pos." has two settings ON and OFF. Use keys (5) and (6) in order to scroll through the control list. Highlight the "Raise Lock De-Act. SW Pos." and press the ok key (9) in order to change the selection and accept the selection.Raise Lock De-Act. Time
See "Hot Keys" for information concerning the "Screed Lift Lock Control Key".
Illustration 48 g01357654
Use keys (5) and (6) in order to scroll through the control menu. Highlight the "Raise Lock De-Act. Time" field and press the ok key (9) . Use key (5) in order to increase the setting for the time. Use key (6) in order to decrease the setting for the time. Press the ok key (9) in order to accept your selection.Lower Lock De-Act. SW Pos.
See "Hot Keys" for information concerning the "Screed Lower Lock Control Key".
Illustration 49 g01357654
The "Lower Lock De-Act. SW Pos." has two settings ON and OFF. Use keys (5) and (6) in order to scroll through the control list. Highlight the "Lower Lock De-Act. SW Pos." and press the ok key (9) in order to change the selection and accept the selection.Lower Lock De-Act. Time
See "Hot Keys" for information concerning the "Screed Lower Lock Control Key".
Illustration 50 g01357654
Use keys (5) and (6) in order to scroll through the control menu. Highlight the "Lower Lock De-Act. Time" field and press the ok key (9) . Use key (5) in order to increase the setting for the time. Use key (6) in order to decrease the setting for the time. Press the ok key (9) in order to accept your selection.Material Feed Autofill Config or Auger and Conveyor
See "Hot Keys" for information concerning the "Feeder System Auto Fill Key".
Illustration 51 g01357654
Use keys (5) and (6) in order to scroll through the control list. Highlight the "Material Feed Autofill Config" and press the ok key (9) in order to change the selection and accept the selection.Totals
Illustration 52 g01357791
The totals screen is accessible from the main menu. The totals screen provides the following information.
"Distance Traveled"
"Operating Hours"
"Paving Distance Traveled"
"Paving Hours"
"Fuel Consumption Rate"Press the