ROD A. 6F4324 - Caterpillar

Illustration 14 g01374065
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Refer to Operation and Maintenance Manual, "Equipment Lowering with Engine Stopped" for further information.Improper Connections For Jump Start Cables (13)This safety message is located next to the battery.
Illustration 15 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.Pressurized System (14)This safety message is located next to the cooling system filler cap.
Illustration 16 g01378799
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information.Rotating Fan (15)This safety message is located near the engine fan.
Illustration 17 g02793868
Cutting Hazard! Keep hands clear of fan while engine is running. May cause serious injury or death.
Crushing Hazard (16)This safety message is located on the rear of each side of the machine.
Illustration 18 g01374060
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Aerosol Starting Aid (17)This safety message is located on the air cleaner housing.
Illustration 19 g01372254
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for further information.Hot Surface (18)This safety message is located by the muffler.
Illustration 20 g01372256
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.