ROD A.5B1919 6F4326 - Caterpillar

C3.3
Bore ... 94 mm (3.70 inch)Stroke ... 120 mm (4.72 inch)Cylinder arrangement ... In-lineType of combustion ... Direct injectionNumber of cylinders ... 4Valves per cylinder ... 4
Table 1
Valve Timing
Intake Open Position: .24 Radius (14 degrees) before TC
Closed Position: .70 Radius (40 degrees) after BC
Exhaust Open Position: .87 Radius (50 degrees) before BC
Closed Position: .24 Radius (14 degrees) after TC Firing order ... 1, 3, 4, 2When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction. ... ClockwiseWhen the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction. ... ClockwiseThe front of the engine is opposite the flywheel end of the engine. The left side and the right side of the engine are determined from the flywheel end. Number 1 cylinder is the front cylinder of the engine.Tightening Torques of Screws, Bolts, and Nuts for General Use
Note: If the tightening torque is not specified, refer to the table below for the none specified torque values.
Table 2
Indication on top of bolt No-grade or 4T(1) 7T(2)
Indication on top of nut No-grade or 4T(1)
Unit N m kgf m lbf ft N m kgf m lbf ft
M6 7.9 to 9.3 0.80 to 0.95 5.8 to 6.8 9.81 1.00 to 1.15 7.24 to 8.31
M8 18 to 20 1.8 to 2.1 13 to 15 24 to 27 2.4 to 2.8 18 to 20
M10 40 to 45 4.0 to 4.6 29 to 33 49 to 55 5.0 to 5.7 37 to 41
M12 63 to 72 6.4 to 7.4 47 to 53 78 to 90 7.9 to 9.2 58 to 66
(1) 4T is indicated by a "4" present on the bolt head, if no mark is present the fastener is no-grade
(2) 7T is indicated by a "7" present on the bolt head