ROD 6J2687 - Caterpillar

Illustration 1 g06307250
Table 1
Item Qty Part Specification Description
1 12 268-5759 Pin Diameter is 31.593 0.008 mm (1.2438 0.0003 inch).
2 36 7X-2565 Bolt Use the following procedure to tighten the bolts:
1. Tighten the bolts in the alternate sequence to 360 60 N m (266 44 lb ft).
2. Turn the bolts to an additional angle of 120 10 degrees.
3 2 474-9320 Sleeve Bearing Bore before assembly is 130.240 0.013 mm (5.1276 0.0005 inch).
4 2 470-0337 Pin Diameter is 109.850 0.025 mm (4.3248 0.0010 inch).
5 Use as required in order to obtain 0.00 0.10 mm (0.000 0.004 inch).
26 138-7436 Shim Pack Total thickness of a new shim pack is 3.90 0.08 mm (0.154 0.003 inch).
Thickness of each shim in the shim pack for ten shims is 0.16 mm (0.006 inch).
Thickness of each shim in the shim pack for two shims is 0.8 mm (0.03 inch).
Thickness of each shim in the shim pack for 14 shims is 0.05 mm (0.002 inch).
6 16 8T-4140 Bolt Torque to 270 40 N m (199 30 lb ft).