ROD AS 8J1867 - Caterpillar

1. Remove heat shield (1) and the spacers. 2. Loosen nuts (3). Lift the rear of exhaust manifold (2). Slide the exhaust manifold back and up to remove. Remove the exhaust manifold gaskets.Install Exhaust Manifold
1. Install gaskets (2) on the exhaust manifold studs. Put 9M3710 Anti-Seize Compound on the threads of the exhaust manifold studs.2. Install exhaust manifold (1). Tighten nuts (3) to a torque of 32 5 lb.ft. (43 7 N m). 3. Put the spacers and heat shield (4) in position and install washers and nuts (5). Tighten nuts (5) to a torque of 32 5 lb.ft. (43 7 N m).end by:a) install fuel injection linesb) install turbocharger