ROD ASSEM. 8J5952 - Caterpillar

Loader Payload Utilization
The Loader Payload Utilization covers the total machine running time, the report range, and the total machine productive time.Total Time - Duration of time in the selected time range. The following occurs when a truck record spans a selected time or shift and a non-selected time or shift:
Only bucket cycles occurring in the selected time range or selected shift are use
The truck is counterThis total time will equal the sum of the following data:
Production time
Labeled delay time
AUTO delay timeProduction Time - The total time that is accounted for as production. Segmentation of the Production Time is not currently supported for Medium Wheel Loader applications.Labeled Delay Time - This feature is not currently supported for Medium Wheel Loaders.Auto Delay Time - This feature is not currently supported for Medium Wheel Loaders.Loader Payload Fuel Usage
This section covers the fuel statistics calculated by the ECM during the production time of the machine. All fuel burned since the last cycle was time stamped, excluding fuel used while in standby, will be used for calculations.
Fuel Used/Hour – The average fuel used per hour of production operation time.
Fuel Used/Ton – The average fuel used per Ton/tonne of material moved.
Fuel Used/Cycle – The average fuel used per machine cycle.
Total Fuel Used – The total fuel used during the production operation time.
Fuel Used/Pass – The average fuel used per pass.
Tons/Fuel Used – The average Ton/tonne of material moved for 1 Gal/Lit of fuel.Loader Payload Production
This section covers how productive a machine is by using:
Total weight of material moved
Number of trucks loaded
Total time the machine was productive
Volume of the material moved
Total time the machine was running during the reportThe display is in:
Tons/Hour - the average weight of material moved per hour.
Tons/Prod & Auto Delay Hour - This feature is not currently supported for Medium Wheel Loaders.
Tons/Production Hour - The average weight of material moved per production hour.
Machines/hour - The average number of machines loaded per hour.
Machines/Prod & Auto Delay Hour - This feature is not currently supported for Medium Wheel Loaders.
Machines/Prod Hour: This feature is not currently supported for Medium Wheel Loaders.
Material Volume/Hour - The average volume of material moved per hour. This value is based on material density inputted into the Material ID section of VIMSpc. The value is only accurate if correctly using the Material ID feature.
Material Volume/Prod & Auto Delay Hour - This feature is not currently supported for Medium Wheel Loaders.
Material Volume/Production Hour - Average volume of material used per production hour. This value is based on material density inputted into the Material ID section of VIMSpc. The value is only accurate if correctly using the Material ID feature.Loader Payload Distribution
A Bucket Payloads tabular histogram that is reported in the selected time range. The Payload Distribution is shown in two formats, Count and Percentage. Both formats are separated into the sections below with the units being the same units selected for the report:
Under 5
5-10
10-15
15-20
20-25
25-30
30-35
35-40
40-45
Over 45Count
The total count of loader buckets that fall into each weight range. The sum of all the