ROD AS-PULLING 8T2679 - Caterpillar

Illustration 2 g00583648
Lift the seat cushion on the training seat forward. Remove bolts (4) and the washers.
Illustration 3 g00583669
Remove bolts (7) and the washers from speaker assembly (6) .
Disconnect connector receptacle (5). Remove speaker assembly (6) .
Illustration 4 g00583670
Remove bolts (9) and the washers. Remove training seat (8) .
Illustration 5 g00584715
Remove screws (10) in order to remove the panel from the floormat.
Illustration 6 g00584752
Remove bolts (12) and the washers from the brake lever assembly.
Disconnect electrical connector (11) .
Illustration 7 g00584754
Remove floormat (14) and floormat (13) from the cab floor.
Illustration 8 g00584756
Remove bolts (16) and the washers. Use two people to remove seat assembly (15) .Installation Procedure
Illustration 9 g00584756
Use two people to install seat assembly (15) .
Install bolts (16) and the washers.
Illustration 10 g00584754
Install floormat (13) and floormat (14) to the cab floor.
Illustration 11 g00584752
Connect electrical connector (11) .
Install bolts (12) and the washers to the brake lever assembly.
Illustration 12 g00584715
Place the panel in position and install screws (10) .
Illustration 13 g00583670
Place training seat (8) in position on the floor. Install bolts (9) and the washers.
Illustration 14 g00583669
Place speaker assembly (6) in position and install bolts (7) and the washers.
Connect connector receptacle (5) .
Illustration 15 g00583648
Install bolts (4) and the washers inside the seat area. Place the seat cushion in position on the training seat.
Illustration 16 g00583647
Install insulation (2) on the training seat.
Place seat belt assembly (1) in position. Install bolts (3) and the washers on both sides of the training seat.