ROD AS 9J3367 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Gp 1
B 289-2838 Spanner 1
289-2846 Spline Wrench 1
C 8T-4184 Bolt 3
D - Flat Stock Steel
1/16 - 3/4 by 8 2 Start By:
Remove the pump drive.
Illustration 1 g03133996
Remove ten bolts (1) and bolt (3). Remove manifold (2).
Illustration 2 g01231869
Use Tooling (A) in order to remove race (4) from manifold (2).
Illustration 3 g01231871
Remove carrier assembly (6) from manifold (5).
Illustration 4 g01231872
Remove O-ring seals (7).
Illustration 5 g01231873
Opposite side
Remove seal (8).
Illustration 6 g01231874
Remove retaining ring (9), bearing (10), and gear (11).
Illustration 7 g01354737
Remove bearing cups (12) and (13) from gear (11).
Illustration 8 g01354874
Remove bearing cone (14) from carrier (15).
Illustration 9 g01354888
Illustration 10 g02457576
Release lock (16). Use Tooling (B) in order to remove nut (17). Turn over the manifold. Use Tooling (C) in order to remove gear (19). Remove bearing cone (18). Note: If necessary, use Tooling (D) to assist the removal of gear (19).
Illustration 11 g01354899
Remove bearing cone (20) from gear (19).
Illustration 12 g01354903
Remove bearing cups (21) and (22).