ROD-PISTON 9T5791 - Caterpillar

Illustration 1 g00920605The ejector support rollers are located at the rear of the ejector. There are two ejector support rollers. These rollers support the rear portion of the ejector.
Park the machine on level ground. Engage the parking brake.
Lower the bowl to the ground and close the apron.
Check the adjustment for the ejector support rollers. The ejector support rollers are correctly adjusted if the ejector support rollers run fully in the track.
Loosen roller shaft clamping bolt (1).
Move eccentric roller shaft (2) to a position that allows the roller to fully contact the track.
Tighten roller shaft clamping bolt (1).
Repeat Step 4 through Step 6 in order to adjust the other ejector support roller.
Start the engine.
Move the ejector forward and backward.
Stop the engine.
Check for drag between the ejector and the sides of the frame. Repeat the adjustment procedure, if necessary.