ROLL-ABRASIVE 1U6848 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-0510     Driver Gp     1    Start By:
Remove the charge pump.
Remove the implement pump.
Illustration 1 g03856345
Remove bolts (5) and adapter (4). Remove O-ring seal (3). Use Tooling (A) to remove bearing (2). Remove gear (1) .
Illustration 2 g01104019
Remove cover (8). Remove O-ring seal (7). Use Tooling (A) to remove bearing (6) .
Illustration 3 g03855922
Remove bolts (13) and adapter (12). Remove O-ring seal (11). Use Tooling (A) to remove bearing (10). Remove gear (9) .
Illustration 4 g01104022
Remove cover (14). Remove O-ring seal (15). Remove bearing (16) .Installation Procedure
Illustration 5 g01104415
(S) 15 1 degree (T) 15 1 degree (U) 2.8 0.5 mm (0.11 0.02 inch) (V) 2.8 0.5 mm (0.11 0.02 inch)Illustration 5 is provided as a reference tool for the following Steps.
Illustration 6 g01104022
Orient bearing (16) to Dimension (S) .
Use Tooling (A) to install bearing (16) to the depth of Dimension (U) .
Install O-ring seal (15). Install cover (14) .
Illustration 7 g03855922
Illustration 8 g03856503
(X) 15 5 degrees (W) 3.5 0.5 mm (0.14 0.02 inch)
Install gear (9). Orient bearing (10) to Dimension (X) and install bearing (10) in adapter (12) to the depth of Dimension (W) .
Install O-ring seal (11). Install adapter (12). Install bolts (13) .
Illustration 9 g01104019
Orient bearing (6) to Dimension (T) .
Use Tooling (A) to install bearing (6) to the depth of Dimension (V) .
Install O-ring seal (7). Install cover (8) .
Illustration 10 g03856345
Illustration 11 g03856406
(Y) 10 5 degrees (Z) 4 0.5 mm (0.16 0.02 inch)
Install gear (1). Orient bearing (2) to Dimension (Y ) and use Tooling (A) to install bearing (2) in adapter (4) to the depth of Dimension (Z) .
Install O-ring seal (3). Install adapter (4) .End By:
Install the implement pump.
Install the steering pump.