ROLL-ABRASIVE 1U6853 - Caterpillar

Illustration 1 g03891703
Left side of C13 engine
(1) Atmospheric pressure sensor
(2) Inlet manifold pressure sensor
(3) Valve cover connector to fuel injectors
(4) Inlet air temperature sensor
(5) Connector to fuel temperature sensor
(6) Engine oil pressure sensor
(7) Primary speed/timing sensor
(8) Secondary speed/timing sensor
Illustration 2 g03891471
Front view of the engine
(9) Coolant temperature sensor
Illustration 3 g03891717
Remote fuel filter base from the rear of the C13 engine
(10) Fuel temperature sensor The electronic control system has the following components:
Engine Control Module (ECM)
Pressure sensors
Temperature sensors
Speed/Timing sensors
SolenoidsThe ECM functions as the governor for the engine. The ECM modulates the quantity of fuel and injection timing in order to govern the engine.The ECM can activate the following starting aids:
Air inlet heater
Ether injection
Cycling of injector solenoids The ECM will provide the operator with an illuminated warning light if the engine senses an engine problem. The operator may also experience an engine derate. The warning light or the engine derate could turn off during engine operation. The diagnostic code will be logged in the ECM. The diagnostic code can then be diagnosed at a later time.The ECM is password protected in order to secure calibration of the ECM and customer programmed information. The calibration can be adjusted with flash files by authorized dealers. The flash file is programmed into the personality module.