2P8123 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING SERVICE GROUP Caterpillar parts
983
Rating:
Alternative (cross code) number:
CA2P8123
2P-8123
2P8123
CA2P8123
2P-8123
2P8123
Weight: 286 pounds 129 kg.
TRACK LOADER,
Compatible equipment models: 2P8123:
For full view, you need register
Caterpillar SIS machinery equipment:
Information:
Start By:a. remove radiator guardb. remove hoodc. remove hydraulic oil cooler
At operating temperature, the engine coolant is hot and under pressure. Steam can cause personal injury. Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand. Remove the fill cap from the radiator slowly to relieve pressure. Cooling system conditioner alkali. Avoid contact with the skin and eyes to prevent personal injury.
1. Release the pressure in the cooling system. Drain the coolant from the radiator.
Effective July 1, 1992 regulations prohibit the venting of any refrigerant into the atmosphere. Refer to Caterpillar publication SENR3334-01 and NEDG5065-01 for the proper procedure, equipment and tools to reclaim refrigerant from any Caterpillar machine.
Always wear goggles when working on air conditioning systems. The system is under pressure at all times, engine running or not. Escaping Freon-12 (C C12F2 Dichloro Difluoro Methane) can cause freezing of human flesh.Do not smoke while working on air conditioning. Inhaling Freon-12 through any smoking material, although not toxic or flammable, can cause violent illness. Also heat must never be applied to a charged system. See Air Conditioning And Heating Service Manual Form No. SENR3334-01, for more information on removal and installation of lines and refrigerant from the system.
Evacuate the system, See Air Conditioning And Heating Service Manual Form No. SENR3334-01. 2. Remove bolts (1) that secure fan guards.3. Remove two fan guards (2). 4. Disconnect two air conditioning hoses (3).5. Loosen clamp and disconnect upper radiator hose (4). 6. Coolant drain (5).7. Disconnect transmission cooler line (6). 8. Disconnect transmission cooler line (7).9. Loosen clamp and disconnect lower radiator hose (8). 10. Attach tool (A) from hoist with lifting straps as shown.11. Remove two bolts (9) both sides of radiator frame.12. Remove upper support bolt (10) both sides of radiator.13. Remove radiator. Weight of the radiator is 66 kg (145 lb). 14. To separate the condenser from the radiator remove bolt (11) and remove fan shroud (12).15. Remove bolt (13) and remove condenser (14). Install in the reverse order.End By:a. install hydraulic oil coolerb. install radiator guardc. install hood16. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.17. Fill the hydraulic system with hydraulic oil to the correct level. See the Operation & Maintenance Manual. For charging the air conditioning system refer to Form No. SENR3334-01.
At operating temperature, the engine coolant is hot and under pressure. Steam can cause personal injury. Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand. Remove the fill cap from the radiator slowly to relieve pressure. Cooling system conditioner alkali. Avoid contact with the skin and eyes to prevent personal injury.
1. Release the pressure in the cooling system. Drain the coolant from the radiator.
Effective July 1, 1992 regulations prohibit the venting of any refrigerant into the atmosphere. Refer to Caterpillar publication SENR3334-01 and NEDG5065-01 for the proper procedure, equipment and tools to reclaim refrigerant from any Caterpillar machine.
Always wear goggles when working on air conditioning systems. The system is under pressure at all times, engine running or not. Escaping Freon-12 (C C12F2 Dichloro Difluoro Methane) can cause freezing of human flesh.Do not smoke while working on air conditioning. Inhaling Freon-12 through any smoking material, although not toxic or flammable, can cause violent illness. Also heat must never be applied to a charged system. See Air Conditioning And Heating Service Manual Form No. SENR3334-01, for more information on removal and installation of lines and refrigerant from the system.
Evacuate the system, See Air Conditioning And Heating Service Manual Form No. SENR3334-01. 2. Remove bolts (1) that secure fan guards.3. Remove two fan guards (2). 4. Disconnect two air conditioning hoses (3).5. Loosen clamp and disconnect upper radiator hose (4). 6. Coolant drain (5).7. Disconnect transmission cooler line (6). 8. Disconnect transmission cooler line (7).9. Loosen clamp and disconnect lower radiator hose (8). 10. Attach tool (A) from hoist with lifting straps as shown.11. Remove two bolts (9) both sides of radiator frame.12. Remove upper support bolt (10) both sides of radiator.13. Remove radiator. Weight of the radiator is 66 kg (145 lb). 14. To separate the condenser from the radiator remove bolt (11) and remove fan shroud (12).15. Remove bolt (13) and remove condenser (14). Install in the reverse order.End By:a. install hydraulic oil coolerb. install radiator guardc. install hood16. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.17. Fill the hydraulic system with hydraulic oil to the correct level. See the Operation & Maintenance Manual. For charging the air conditioning system refer to Form No. SENR3334-01.
Parts roll Caterpillar catalog:
9D0670
ROLL-OVER PROTECTIVE SYSTEM
650B, 666B
650B, 666B