AVSPARE.COM
parts catalog

ROLLER A 0543562 - Caterpillar



0543562 ROLLER A Caterpillar parts ROLLER
Rating:
16
Alternative (cross code) number:
CA0543562
054-3562
0543562
Caterpillar 0543562 ROLLER A
Weight: 1 pounds 0 kg.

Buy ROLLER A 0543562 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g06348236
Front view
Table 1
Item Qty Part Specification Description
1 2 0L-1026 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores for the cup plug at both the ends.
A - - Installation depth for the cup plug is 1.25 0.25 mm (0.005 0.010 inch).
2 14 175-0454 Bolt Use the following procedure to tighten the main bearing cap bolts:
1. Install main bearing caps with the part number to the right and towards the front face of the block.
2. Apply molybdenum or SAE 30 oil to the threads of the bolts and faces of the washers.
3. Tighten bolts to 95 5 N m (70 4 lb ft).
4. Again tighten bolts simultaneously on each bearing cap to a turn angle of 90 5 degrees.
4 2 3B-0623 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores for the cup plug at both the ends.
D - - New dimension from centerline of the crankshaft bore to the top surface of the cylinder block is 356.5 mm (14.04 inch).
E 7 212-7002 Bearing Cap Width of the main bearing cap (3) is 175.000 0.020 mm (6.8897 0.0008 inch).
Width in the cylinder block for the main bearing cap is 175.000 0.018 mm (6.8897 0.0007 inch).
F - - Installation depth for the cup plug is 1.25 0.25 mm (0.005 0.010 inch).
G - - New dimension from centerline of the crankshaft bore to the pan rail is 110 mm (4.3 inch).
H - - Bore in the cylinder block for the seven main bearings is 112.000 0.013 mm (4.4094 0.0005 inch).
Illustration 2 g06348240
Right side view
Table 2
Item Qty Part Specification Description
5 4 4F-5695 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores for the cup plug.
K - - Installation depth for the cup plug is 1.25 0.25 mm (0.005 0.010 inch).
Illustration 3 g06348266
Table 3
Item Qty Part Specification Description
The camshaft bearings are installed into the cylinder block at the following positions:
L - - Distance from front face of cylinder block is 816.5 0.8 mm (32.15 0.03 inch).
M - - Distance from front face of cylinder block is 536.5 0.8 mm (21.12 0.03 inch).
N - - Distance from front face of cylinder block is 294.5 0.8 mm (11.59 0.03 inch).
P - - Distance from front face of cylinder block is 0.50 0.25 mm (0.020 0.010 inch).


Parts roller Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.