1175914 ROLLER Caterpillar parts
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH
Rating:
Alternative (cross code) number:
CA1175914
117-5914
1175914
CA1175914
117-5914
1175914
Weight: 0.02 pounds 0 kg.
WHEELED EXCAVATOR,
Compatible equipment models: 1175914:
Number on catalog scheme:
3D
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01526154
Illustration 2 g01526158
Start the machine and lower tow arm (5).
Shut off the machine. Turn the disconnect switch to the OFF position.
Disconnect hose assemblies (3) from hydraulic cylinder (4).
Remove cotter pin (5) and pin assembly (6).
Remove cotter pin (1), pin assembly (2), and hydraulic cylinder (4). Installation Procedure
Illustration 3 g01526154
Illustration 4 g01526158
Install hydraulic cylinder (4), pin assembly (2), and cotter pin (1).
Install pin (6) and cotter pin (5).
Connect hose assemblies (3) to hydraulic cylinder (4).
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01526154
Illustration 2 g01526158
Start the machine and lower tow arm (5).
Shut off the machine. Turn the disconnect switch to the OFF position.
Disconnect hose assemblies (3) from hydraulic cylinder (4).
Remove cotter pin (5) and pin assembly (6).
Remove cotter pin (1), pin assembly (2), and hydraulic cylinder (4). Installation Procedure
Illustration 3 g01526154
Illustration 4 g01526158
Install hydraulic cylinder (4), pin assembly (2), and cotter pin (1).
Install pin (6) and cotter pin (5).
Connect hose assemblies (3) to hydraulic cylinder (4).
Caterpillar parts catalog:
Parts roller Caterpillar catalog:
1265635
ROLLER
216, 228, 236, 248, CB34B, CB34B XW, CC34B, CP-533E, CP-54B, CP-56, CP-573E, CP-64, CS-531D, CS-533C, CS-533D, CS-533E, CS-54, CS-54B, CS-56, CS-563C, CS-563D, CS-563E, CS-573C, CS-573D, CS-583C, CS-5...
216, 228, 236, 248, CB34B, CB34B XW, CC34B, CP-533E, CP-54B, CP-56, CP-573E, CP-64, CS-531D, CS-533C, CS-533D, CS-533E, CS-54, CS-54B, CS-56, CS-563C, CS-563D, CS-563E, CS-573C, CS-573D, CS-583C, CS-5...
6E0725
ROLLER
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 267, 267B, 268B, 287, 623E, 623F, 623G, 795F AC, 795F XQ, 797, 797B, 797F, 906H, 906H2, 907H...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 267, 267B, 268B, 287, 623E, 623F, 623G, 795F AC, 795F XQ, 797, 797B, 797F, 906H, 906H2, 907H...
8U6977
ROLLER
205B, 206B, 211B, 212B, M312, M315, M318, M320
205B, 206B, 211B, 212B, M312, M315, M318, M320
1306652
ROLLER
M312, M315, M318, M320
M312, M315, M318, M320
1225716
ROLLER
M312, M315, M318, M320
M312, M315, M318, M320
307B, 312C, 312D, 315C, 315D L, 318C, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319D L, 319D LN, 320C, ...
6C9035
ROLLER
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 320B FM LL, 322 FM L, 322B L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 365B, 365B II, 375, 375 L, 3...
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 320B FM LL, 322 FM L, 322B L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 365B, 365B II, 375, 375 L, 3...
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
7Y2155
ROLLER & BEARING AS
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 323D LN, E110B, E120B
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 323D LN, E110B, E120B
1R5843
ROLLER AS-BEARING
312, 312B, 313B, E120B
312, 312B, 313B, E120B
312, 312B, 312C, 312C L, 313B, 314C, E120B
8E5602
ROLLER & BEARING AS
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
6I6528
ROLLER & BEARING AS
307, 307B, 308D, 308E2 CR
307, 307B, 308D, 308E2 CR
6I6571
ROLLER & BEARING AS
307, 307B
307, 307B
307, 307B
1225716
ROLLER
M312, M315, M318, M320
M312, M315, M318, M320
1306652
ROLLER
M312, M315, M318, M320
M312, M315, M318, M320
8U6977
ROLLER
205B, 206B, 211B, 212B, M312, M315, M318, M320
205B, 206B, 211B, 212B, M312, M315, M318, M320