ROLLER GP-TRACK-DOUBLE FLANGE 1846306 - Caterpillar

8C3647 (24V), 6V5537 (24V), 6V5795 (24V)
Rotation as viewed from drive end ... ClockwiseNo load conditions at 25°C (77°F): Speed ... 7643 1683 rpmCurrent draw ... 67.5 7.5AVoltage ... 23VClearance between pinion and housing (pinion clearance) ... 9.1 mm (.36 in)(1) Torque for large terminal nuts ... 30.5 3.5 N m (22 3 lb ft)(2) Torque for small terminal nuts ... 2.25 0.25 N m (20 2 lb in)(3) Tighten motor frame terminal to a torque of ... 8 3 N m (70 26 lb in) SolenoidCurrent consumption (draw) at 25°C (77°F): Pull in windings at 10V ... 56.5 4.5Hold in windings at 10V ... 14.6A max 7T0798 (24V), 106-8552 (24V)
Rotation as viewed from drive end ... ClockwiseNo load conditions at 25°C (77°F): Speed ... 5500 rpm minCurrent draw ... 140A maxVoltage ... 24V(1) Torque for large terminal nuts ... 30.5 3.5 N m (270 30 lb in)(2) Torque for small terminal nuts ... 2.25 0.25 N m (20 2 lb in) SolenoidCurrent consumption (draw) at 25°C (77°F): Pull in windings at 24V ... 51AHold in windings at 24V ... 7A 6V5538 (24V)
Rotation as viewed from drive end ... ClockwiseNo load conditions at 25°C (77°F): Speed ... 3300 rpm minCurrent draw ... 80A maxVoltage ... 23.5V(1) Torque for 1/2 - 13 terminal nuts ... 30.5 3.5 N m (270 30 lb in)(2) Torque for 10 - 32 terminal nut ... 2.25 0.25 N m (20 2 lb in)(3) Torque for M10 × 1.5 terminal nut ... 17.5 2.5 N m (155 22 lb in)(4) Torque for bolt in end of terminal stud ... 1.5 0.5 N m (13 4 lb in) SolenoidCurrent consumption (draw) at 25°C (77°F): Pull in windings at 24V ... 103AHold in windings at 24V ... 19A