ROLLER GP-CARR 1885600 - Caterpillar

Note: Oil pan immersion heaters are not recommended for heating the lube oil. To ensure the compatibility of the components, only use equipment that is recommended by Caterpillar.Startability will be improved at temperatures below 12 °C (55 °F) with a starting aid. When the temperature is below 13 °C (55 °F), Caterpillar recommends the use of the following starting aids before you start the engine:
Jacket Water Heater
Crankcase Oil HeaterNote: The heated fluid requires continuous circulation. This process will help to prevent localized overheating of the fluid.Jacket water heaters are available for cold weather starting. The heated water will help to keep the oil in the engine block warm enough to flow when the engine is started.When No. 2 diesel fuel is used, a fuel heater will maintain the temperature of the fuel above the cloud point. Fuel line insulation will help to maintain the fuel temperature.Consult your Cat dealer for more information on the starting aids that are available for cold weather starting.Note: Engines that are started at temperatures below 13 °C (55 °F) without starting aids may damage internal components.Electric Starting Motor
Maintain the proper level of electrolyte in the batteries. Keep the batteries fully charged.To maximize the battery power, heat the battery compartment or store the batteries in a warm location. Typically, batteries only have 50 percent of the capability at −10 °C (14 °F) versus 27 °C (80 °F).Extra battery capacity may be necessary for cold temperatures.Air Starting Motor
Note: The maximum air pressure for starting must not exceed 1030 kPa (150 psi).To start the engine at colder temperatures, the following conditions may be necessary:
Maximum air pressure for the starting motor
An additional volume of air