ROLLER AS 1R0862 - Caterpillar

Setting the Warning Distance
You need to be in "Service Mode" in order to access the avoidance zone setting in the "Setup Menu" dialog.Perform the following steps in order to access the "Avoidance Zone" screen.
From the "Setup Menu – Configuration" screen, press the "Down Arrow or Up Arrow" button until "Avoidance Zone" is highlighted.
Press the "OK" key. A screen similar to Illustration 1 appears.Illustration 1 shows the default warning distance.
Illustration 1 g01361191
Do one of the following.
Press the arrow button in order to set the warning distance.
Press the "Default <value>" soft key in order to set the default warning distance for the selected machine type.
Press the "OK" button in order to confirm the setting.
Press the "ESC" button in order to exit the "Setup Menu – Configuration" screen. The changes take effect immediately.