2053594 ROLLER & BEARING AS Caterpillar parts
1090, 1190, 1190T, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, 324E LN, 326D L, TK711, TK721
Rating:
Alternative (cross code) number:
CA2053594
205-3594
2053594
CA2053594
205-3594
2053594
Weight: 64 pounds 29 kg.
EXCAVATOR, TRACK FELLER BUNCHER,
Compatible equipment models: 2053594:
Number on catalog scheme:
1
For full view, you need register
Information:
Illustration 1 g01395500
(1) Shims
(2) ShimsAdjustment Procedure for End Play for the Upper Transfer Gear
Desired end play ... 0.11 0.04 mm (0.004 0.002 inch)
Be sure that the bearing cups and the bearing cones are properly seated against the shoulders of the shaft. Verify that the bearings are properly seated with a 0.038 mm (0.0015 inch) feeler gauge.
Assemble the gear with the center in the vertical position. Assemble the bearing cup to the housing without shims (1). Note: Be sure that the cage does not bind in the housing.
Install two bolts on opposite sides. Tighten the two bolts finger tight. Do not use self-locking bolts for the setting procedure.
Tighten the bolts to a torque of 1.7 N m (15.00 lb in). Rotate the gear or rotate the shaft for three revolutions. Tighten the bolts to a torque of 3.4 N m (30.00 lb in). Rotate the gear or rotate the shaft for three revolutions. Tighten the bolts again to a torque of 3.4 N m (30.00 lb in).
At one bolt, measure the gap between the housing and the bearing cage. Use a feeler gauge to measure the gap in a radius from the center of the bolt. Record the measurement. Measure the second bolt in the same manner and record the measurement.
Average the two measurements together. Add the constant to the average. The constant for the upper transfer gear is 0.23 mm (0.009 inch).This number will be the thickness of shim pack (1) that is needed.
Assemble the correct shim pack thickness and verify with a micrometer.
Remove the bearing cup and assemble with the proper shim pack. Tighten the bolts to a torque of 55 10 N m (40 7 lb ft).Adjustment Procedure for End Play for the Lower Transfer Gear
Desired end play ... 0.11 0.04 mm (0.004 0.002 inch)
Be sure that the bearing cups and the bearing cones are properly seated against the shaft. Verify that the bearings are properly seated with a 0.038 mm (0.0015 inch) feeler gauge.
Assemble the gear with the center in the vertical position. Assemble the bearing cup to the housing without shims (2). Note: Be sure that the cage does not bind in the housing.
Install two bolts that are located 180° from each other. Do not use self-locking bolts for the setting procedure.
Tighten the bolts to a torque of 1.7 N m (15.00 lb in). Rotate the gear or rotate the shaft for three revolutions. Tighten the bolts to a torque of 3.4 N m (30.00 lb in). Rotate the gear or rotate the shaft for three revolutions. Tighten the bolts again to a torque of 3.4 N m (30.00 lb in).
Measure the gap at one bolt between the housing and the bearing cage. Use a feeler gauge to measure the gap in a radius from the center of the bolt. Record the measurement. Measure the second bolt in the same manner and record the measurement.
Average the two measurements together. Add the constant to the average. The constant for the
Caterpillar parts catalog:
Parts roller Caterpillar catalog:
322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, OEMS
311, 311B, 311C, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320B L, 32...
320B, 322B L, 322C, 322C FM, 325B, 325B L, 325C, 325C FM, 325C L, 330C, 330D, 330D L, 336D L, 336D LN, 345D, OEMS
322, 322 FM L, 322 LN, 322B L, 322B LN
3828630
ROLLER
324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 374F L, 390F L, 568 FM LL
324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 374F L, 390F L, 568 FM LL
2061262
ROLLER & BEARING AS
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 322C, 324D FM, 329E, 511, 521, 522, OEMS, TK711, TK721, TK722, TK741
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 322C, 324D FM, 329E, 511, 521, 522, OEMS, TK711, TK721, TK722, TK741
2069257
ROLLER & BEARING AS
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320C, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 329D, 329D L, ...
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320C, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 329D, 329D L, ...
6I9398
ROLLER & BEARING AS
322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, 324E, 324E L, 326D L, OEMS
322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, 324E, 324E L, 326D L, OEMS
6Y1056
ROLLER & BEARING AS
2290, 2390, 2391, 320B, 320C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 FM L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 33...
2290, 2390, 2391, 320B, 320C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 FM L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 33...
1524138
ROLLER & BEARING AS
320B, 322B L, 322C FM, 325B L, OEMS
320B, 322B L, 322C FM, 325B L, OEMS
3752338
ROLLER & BEARING AS
322C, 324D, 324D L, 324E, 324E L
322C, 324D, 324D L, 324E, 324E L
3597501
ROLLER & BEARING AS
322C, 324D FM, 324D FM LL, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329E, 329E L, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
322C, 324D FM, 324D FM LL, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329E, 329E L, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
1524138
ROLLER & BEARING AS
320B, 322B L, 322C FM, 325B L, OEMS
320B, 322B L, 322C FM, 325B L, OEMS
1402457
ROLLER & BEARING AS
322B L, 325B L
322B L, 325B L
1176681
ROLLER AS
322B L, 325 FM L, 325B L
322B L, 325 FM L, 325B L
6Y1056
ROLLER & BEARING AS
2290, 2390, 2391, 320B, 320C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 FM L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 33...
2290, 2390, 2391, 320B, 320C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 FM L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 33...
6I9398
ROLLER & BEARING AS
322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, 324E, 324E L, 326D L, OEMS
322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, 324E, 324E L, 326D L, OEMS
1141330
ROLLER
322B L, 322C
322B L, 322C
1560104
ROLLER AS
HH55, HH65, HH75
HH55, HH65, HH75
1578212
ROLLER
HH45
HH45
1560082
ROLLER AS
HH45, HH55, HH65, HH75
HH45, HH55, HH65, HH75
1559539
ROLLER
HH45, HH55, HH65
HH45, HH55, HH65
2484876
ROLLER
525B, 525C, 535B, 535C, 545, 545C
525B, 525C, 535B, 535C, 545, 545C
1834184
ROLLER
525B, 525C, 535B, 535C, 545, 545C
525B, 525C, 535B, 535C, 545, 545C