ROLLER GP-TRACK 2286405 - Caterpillar

Illustration 1 g00347814
Position the bucket parallel to the ground. The bucket should barely skim the ground. Drive the bucket straight into the pile.
Move the single lever control to the RAISE position as the forward movement slows. Return the single lever control to the HOLD position for additional crowding power.
To load a heaped load, operate the single lever control from left to right. This action is called pumping.
When the bucket is loaded, move the single lever control to the TILT BACK position.
Raise the bucket high in order to pass over the material that is being loaded. Press the direction control switch into REVERSE.
Carry the loaded bucket approximately 40 cm (15 inches) above the ground level.
When you reach the dump area, move the single lever control to the RAISE position.