AVSPARE.COM
parts catalog

ROLLER AR-TRACK 2389566 - Caterpillar



2389566 ROLLER AR-TRACK Caterpillar parts OEMS ROLLER
Rating:
20
Alternative (cross code) number:
CA2389566
238-9566
2389566
Caterpillar 2389566 ROLLER AR-TRACK

Buy ROLLER AR-TRACK 2389566 Caterpillar genuine, new aftermarket tractor parts with delivery
UNDERCARRIAGE,

Compatible equipment models: 2389566:

UNDERCARRIAGE  OEMS   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:


FLOW OF COOLANT
3. Radiator top hose. 5. Housing (water temperature regulators). 6. Coolant to housing for water temperature regulators. 10. Inside bypass. 18. Water temperature regulators (two). C. Flow with warm coolant. D. Flow with cold coolant.
Never run an engine unless the water temperature regulators are installed. With no water temperature regulators in the system, the coolant will continually bypass the radiator and the engine will get too hot.
LOCATION OF WATER TEMPERATURE REGULATORSThe vertical radiator is made with a top tank (2) above the core and a surge tank (9) either above or separate from the top tank. Vent tube (8) connects radiator top tank (2) and surge tank (9). The cross flow radiator is made with a left side tank (2) and a right side tank (11). The surge tank (9) is a part of right side tank (11), separated by an inside baffle. Vent tube (8) connects the surge tank (9) to the radiator.Surge tank (9) has a shunt line (4) that connects to the inlet of water pump (13). This shunt type system keeps a positive pressure on the inlet of water pump (13) at all times. When putting coolant in the cooling system, coolant from surge tank (9) goes through shunt line (4) to the inlet of water pump (13) and fills cylinder block (17) from the bottom. By filling the system from the bottom, any air in the system is pushed out through radiator top tank (2), through vent tube (8) into surge tank (9).Radiator cap (1) is used to keep the correct pressure in the cooling system. This pressure keeps a constant supply of coolant to water pump (13). If this pressure goes too high, a valve in radiator cap (1) moves (opens) to get a reduction of pressure. When the correct pressure is in the cooling system, the valve in radiator cap (1) moves down (to the closed position).
LOCATION OF VENT HOLEThe vent hole is located in the front housing and the outlet elbow is used to let the air out of the cylinder block and head when filling the cooling system with coolant.It is important to keep the vent hole clean and open. If the vent hole is not open it will keep the engine from completely filling with coolant.
LOCATIONS OF HEATER CONNECTIONSThe front housing has several plugs that give access to water passages inside the housing. For the correct access points to install heater hoses, see the LOCATIONS OF HEATER CONNECTIONS picture.Basic Block
Vibration Damper
The twisting of the crankshaft, due to the regular power impacts along its length, is called twisting (torsional) vibration. The vibration damper is installed on the front end of the crankshaft. It is used for reduction of torsional vibrations and stops the vibration from building up to amounts that cause damage.The damper is made of a flywheel ring (1) connected to an inner hub (3) by a rubber ring (2). The rubber makes a flexible coupling between the flywheel ring and the inner hub.
CROSS SECTION OF

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
CIPI Undercarriages L5E00001-UP (MACHINE)
330 CIPI Excavator Track Systems L5E00001-UP (MACHINE)


Parts roller Caterpillar catalog:

8E5600 ROLLER GP-TRACK CARRIER
311, 311B, 311C, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320B L, 32...
1175047 ROLLER GP-TRACK
330, 330 L, 330B L, OEMS
1634147 ROLLER GP-TRACK-SINGLE FLANGE
320B, 322B L, 322C, 322C FM, 325B, 325B L, 325C, 325C FM, 325C L, 330C, 330D, 330D L, 336D L, 336D LN, 345D, OEMS
1791486 ROLLER GP-TRACK-SINGLE FLANGE
325C, 325D FM, 325D FM LL, 330B, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 340D2 L, 568 FM LL, OEMS
6Y3908 ROLLER GP-CARRIER
953, 953B, 953C, D5H, D5H XL, D6M, D6N, OEMS
1175046 ROLLER GP-TRACK
320B, 322 FM L, 322B L, 325, 325 FM L, 325 LN, 325B, 325B L, OEMS
1175045 ROLLER GP-TRACK
311, 311B, 312, 312B, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 320, 320 L, 320B, 320B L, 320N, OEMS
1210827 ROLLER GP-TRACK-DOUBLE FLANGE
953C, D5H, D5H XL, D5HTSK II, D6M, D6N, OEMS
6K9880 ROLLER GP-TRACK CARRIER
205B, 211B, 215C, 215D, 561M, 561N, 939, 939C, 941, 943, D4D, D4E, D4E SR, D4H, D4H XL, D5C, D5C III, D5G, D5K LGP, D5K2 XL, D5M, D5N, PR-1000
1852606 ROLLER GP-EJECTOR
730, 730C, 740, 740B, D400E II
1832874 ROLLER GP-TRACK-SINGLE FLANGE
1290T, 2491, 2590, 312D, 328D LCR, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F...
3004545 ROLLER GP-TRACK CARRIER
312D, 323D SA, 323E L, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 33...
1248237 ROLLER GP-TRACK-SINGLE FLANGE
561M, 561N, 939, 939C, D4H, D4H XL, D4HTSK III, D5C, D5C III, D5G, D5K LGP, D5K2 XL, D5M, D5N, PM-201, PM-565, PM-565B
1528574 ROLLER AR-TRACK & CARRIER
1290T, OEMS, TK732, TK751, TK752
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.