ROLLER GP-TRACK-SINGLE FLANGE 3575368 - Caterpillar

Illustration 1 g01371082
Left side of cab for Forest Machine
Illustration 2 g01371085
Left side of cab for Track Feller BuncherNote: In Illustration 1 and Illustration 2, the door of the cab has been removed in order to show the angle plate.7X-7877 Edging Strip should be installed on the angle plate at the top of the door to the cab for the machines that are listed above. Install 46 cm (18.1 inch) of 7X-7877 Edging Strip in the location that is shown in Illustration 1 or Illustration 2. Installation of the edging will help prevent contact between the operator and the angle plate during the entering or exiting of the cab.
Illustration 3 g01371106
View from inside of cab for Forest Machine after installation of edgingIllustration 3 shows the edging on the plate for the cab of the Forest Machine. On Track Feller Bunchers, the installation will be similar, but the edging will be installed toward the rear of the opening for the door.