ROLLER-RR BRKT 3585744 - Caterpillar

Accessing Diagnostic Codes With The Monitoring System LCD Display
Perform the following steps in order to view the active events and diagnostic codes using the LCD display:
Illustration 1 g01524541
LCD Display - Home
Press the "Menu" button in order to view the main menu.
Illustration 2 g01524553
LCD Display - Main Menu
At the main menu page, scroll to the "Service" menu option and press the "OK" button.
Illustration 3 g01524555
LCD Display - Service Menu
At the service menu page, the first option in the service menu will be "Diagnostics". Press "OK" in order to view the list of active codes and logged codes.
Illustration 4 g01524575
LCD Display - Diagnostics and Events
The Diagnostics list page will display the description and whether the code is currently active. When a listed code is highlighted, pressing the "OK" button will display the Diagnostic/Event detail screen for the code.Note: If the code is active, there will be an "X" in the "Active" column.
Illustration 5 g01524594
LCD Display - Diagnostic and Event DetailsThe detail screen will display the following: Code, CID-FMI or EID-WCI, a description of the failed component, the failure type, Number of times that the code has been activated, machine time of the first occurrence, machine time of the last occurrence and status.For active diagnostic codes, refer to the corresponding troubleshooting procedure in the "Troubleshooting" section of this manual.For active event codes, refer to the "Event Code List" section of this manual for the possible conditions that could cause the active event code and the recommended action that should be followed.