3792885 ROLLER AS Caterpillar parts
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D
Rating:
Alternative (cross code) number:
CA3792885
379-2885
3792885
CA3792885
379-2885
3792885
Weight: 38 pounds 17 kg.
MINI HYD EXCAVATOR,
You can buy:
US$278.23
28 May 2025
FridayParts
Compatible equipment models: 3792885:
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Turbocharged Engines
Disconnect the terminals at the battery.
Drain the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Drain the sea water circuit. Refer to Operation and Maintenance Manual, "Sea Water Strainer - Clean/Inspect" for more information.
Illustration 1 g00758463
Loosen the hose clamps from hose (1) and slide the hose toward the front of the engine.
Loosen the hose clamps from hose (3) and slide the hose upward.
Loosen the hose clamps from hose (5) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (6) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (2) and slide the hose toward the back of the engine.
Loosen the hose clamps from hose (4). Slide hose (4) toward the back of the engine. Remove water temperature regulator housing (7) from the heat exchanger.
Illustration 2 g00743960
Support the heat exchanger. Remove bolt (8) from the support bracket.
Support the heat exchanger and remove two bolts (9) from the support bracket.
Remove the heat exchanger from the engine.Naturally Aspirated Engines
Disconnect the terminals at the battery.
Drain the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Drain the sea water circuit. Refer to Operation and Maintenance Manual, "Sea Water Strainer - Clean/Inspect" for more information.
Illustration 3 g00743803
Loosen the hose clamps from hose (1) and slide the hose toward the front of the engine.
Loosen the hose clamps from hose (3) and slide the hose upward.
Loosen the hose clamp from hose (5) and remove the hose from the heat exchanger.
Remove the hose clamp from hose (6) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (2) and slide the hose toward the back of the engine.
Loosen the hose clamps from hose (4). Slide hose (4) toward the back of the engine. Remove water temperature regulator housing (8) from the heat exchanger.
Remove two bolts (7) that fasten the transmission oil cooler to the heat exchanger.
Illustration 4 g00758488
Support the heat exchanger. Remove bolt (9) from the support bracket.
Support the heat exchanger and remove two bolts (10) from the support bracket.
Remove the heat exchanger from the engine.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Turbocharged Engines
Disconnect the terminals at the battery.
Drain the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Drain the sea water circuit. Refer to Operation and Maintenance Manual, "Sea Water Strainer - Clean/Inspect" for more information.
Illustration 1 g00758463
Loosen the hose clamps from hose (1) and slide the hose toward the front of the engine.
Loosen the hose clamps from hose (3) and slide the hose upward.
Loosen the hose clamps from hose (5) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (6) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (2) and slide the hose toward the back of the engine.
Loosen the hose clamps from hose (4). Slide hose (4) toward the back of the engine. Remove water temperature regulator housing (7) from the heat exchanger.
Illustration 2 g00743960
Support the heat exchanger. Remove bolt (8) from the support bracket.
Support the heat exchanger and remove two bolts (9) from the support bracket.
Remove the heat exchanger from the engine.Naturally Aspirated Engines
Disconnect the terminals at the battery.
Drain the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Drain the sea water circuit. Refer to Operation and Maintenance Manual, "Sea Water Strainer - Clean/Inspect" for more information.
Illustration 3 g00743803
Loosen the hose clamps from hose (1) and slide the hose toward the front of the engine.
Loosen the hose clamps from hose (3) and slide the hose upward.
Loosen the hose clamp from hose (5) and remove the hose from the heat exchanger.
Remove the hose clamp from hose (6) and remove the hose from the heat exchanger.
Loosen the hose clamps from hose (2) and slide the hose toward the back of the engine.
Loosen the hose clamps from hose (4). Slide hose (4) toward the back of the engine. Remove water temperature regulator housing (8) from the heat exchanger.
Remove two bolts (7) that fasten the transmission oil cooler to the heat exchanger.
Illustration 4 g00758488
Support the heat exchanger. Remove bolt (9) from the support bracket.
Support the heat exchanger and remove two bolts (10) from the support bracket.
Remove the heat exchanger from the engine.
Caterpillar SIS machinery equipment:
Caterpillar SIS
301.4C Mini Hydraulic Excavator LJK00001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
301.7D Mini Hydraulic Excavator LJH00001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
302.2D Mini Hydraulic Excavator LJG00001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
301.7D CR Mini Hydraulic Excavator LJ800001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
301.4C Mini Hydraulic Excavator LJ300001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
301.7D Mini Hydraulic Excavator LJ400001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
302.2D Mini Hydraulic Excavator LJ500001-UP (MACHINE) »
379-2885
ROLLER GP-TRACK
Caterpillar parts catalog:
Parts roller Caterpillar catalog:
301.4C, 301.7D, 301.7D CR, 302.2D
3792799
ROLLER
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
3812866
ROLLER
301.4C, 301.7D, 302.2D, 302.4D, 302.7D
301.4C, 301.7D, 302.2D, 302.4D, 302.7D
302.4D, 302.7D
302.4D, 302.7D
301.4C, 301.7D, 301.7D CR, 302.2D
3725958
ROLLER GP
300.9D
300.9D
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
3717144
ROLLER
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
1832875
ROLLER & BEARING AS
1290T, 2491, 2590, 312D, 328D LCR, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F...
1290T, 2491, 2590, 312D, 328D LCR, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F...
3004544
ROLLER & BEARING AS
312D, 323D SA, 323E L, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 33...
312D, 323D SA, 323E L, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 33...
3836945
ROLLER & BEARING AS
308E, 308E2 CR
308E, 308E2 CR
3836956
ROLLER & BEARING AS
308E, 308E CR, 308E SR, 308E2 CR
308E, 308E CR, 308E SR, 308E2 CR
302.4D, 302.7D
302.4D, 302.7D
3812866
ROLLER
301.4C, 301.7D, 302.2D, 302.4D, 302.7D
301.4C, 301.7D, 302.2D, 302.4D, 302.7D
3792799
ROLLER
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D