ROLLER GP-TRACK CARRIER 4220838 - Caterpillar

Illustration 15 g06041558
(H) 487-0461 Snow Wing Lines and Mounting Gp
Use Special Instruction, M0068768 for the installation procedure of the 487-0461 Snow Wing Lines and Mounting Gp.Installation of the 275-5876 Blade Gp
Table 6
275-5876 Blade Gp (- 05) (C)
Item Qty Part No. Part Name
(1c) 1 3B-8489 Grease Fitting
(2c) 2 4T-2969 Cutting Edges
(3c) 1 277-3729 Moldboard Assembly
(4c) 1 277-3731 Rubber Stop
(5c) 1 1J-5929 Bolt
(6c) 30 4F-3654 Bolts
(7c) 30 4K-0367 Bolts
(8c) 1 6K-3632 Locknut
(9c) 2 6V-5684 Bolts
(10c) 2 8T-4223 Hard Washers
Illustration 16 g06037435
Overview of the 275-5876 Blade Gp
Illustration 17 g06042716
(B) 499-3074 Mast Gp
(C) 275-5876 Blade Gp
(F) 452-4030 Lift Link
(J) 487-0462 Extension Tube GpNote: The estimated weight of the 275-5876 Blade Gp is 432 kg (953 lb)
Use a suitable lifting device to lift the blade (C) into position.
Attach blade (C) to the mast (B), extension tube (J), and the lift link (F) as shown.
Unless specified, tighten all fittings and hardware to standard torque.
Illustration 18 g00687600
Check for leaks.Motor Grader in Transport Position
Illustration 19 g06042763
483-5956 Snow Blade and Mounting Gp shown in transport position.
(N5) DO NOT stand beside a snow wing with the moldboard raised into transport position, nor during the process of putting the snow wing into transport position.
(N6) Stand at the rear of the motor grader during the connection of the transport cable.
(C) 275-5876 Blade Gp
(E) 390-0464 Ripper Mounting Gp
(G) 458-9643 Mounting Bracket Gp
(J) 487-0462 Extension Tube Gp
Illustration 20 g06042781
Connection of the transport cable from the extension tube with 483-5956 Snow Blade and Mounting Gp in transport position.
(C) 275-5876 Blade Gp
(E) 390-0464 Ripper Mounting Gp
(G) 458-9643 Mounting Bracket Gp
(J) 487-0462 Extension Tube GpNote: Shorten extension tube group to the shortest length prior to putting snow wing kit into transport position.