4228790 ROLLER GP-TRACK-SINGLE FLANGE Caterpillar parts
320E, 320E L
Rating:
Alternative (cross code) number:
CA4228790
422-8790
4228790
CA4228790
422-8790
4228790
Weight: 74 pounds 33 kg.
EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2019-03-25
2017-02-15
Number on catalog scheme:
For full view, you need register
Information:
Sound Level Information
The declared operator Equivalent Sound Pressure Level (Leq) is 75 dB(A) when "SAE J1166 FEB 2008" is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.The declared average exterior sound pressure level is 80 dB(A) when the "SAE J88 FEB 2008- Constant Speed Moving Test" procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and "the machine moving forward in an intermediate gear ratio". Sound Level Information for Machines in European Union Countries and in Countries that Adopt the "European Union Directives"
Note: The information below applies only to machines that have the CE mark on the PIN plate.The declared dynamic operator sound pressure level is 71 dB(A) for machines with serial number prefix (S/N: N9Y) and (S/N: N9A) and 72 dB(A) for machines with serial number prefix (S/N: E9Y) and (S/N: E9W) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The declared exterior sound power level is 109 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in "ISO 6395:2008". The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling speeds. "The European Union Physical Agents (Vibration) Directive 2002/44/EC"
Vibration Data for Motor Graders
Information Concerning Hand/Arm Vibration Level
When the machine is operated according to the intended use, the hand/arm vibration of this machine is below 2.5 m/s2.Information Concerning Whole Body Vibration Level
This section provides vibration data and a method for estimating the vibration level for motor graders.The expected vibration levels can be estimated with the information in Table 1 in order to calculate the daily vibration exposure. A simple evaluation of the machine application can be used. For typical operating conditions, use the average vibration levels as the estimated level. With an experienced operator and smooth terrain, subtract the Scenario Factors from the average vibration level in order to obtain the estimated vibration level. For aggressive operations and severe terrain, add the Scenario Factors to the average vibration level in order to obtain the estimated vibration level.
Table 1
"ISO Reference Table A - Equivalent vibration levels of
The declared operator Equivalent Sound Pressure Level (Leq) is 75 dB(A) when "SAE J1166 FEB 2008" is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.The declared average exterior sound pressure level is 80 dB(A) when the "SAE J88 FEB 2008- Constant Speed Moving Test" procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and "the machine moving forward in an intermediate gear ratio". Sound Level Information for Machines in European Union Countries and in Countries that Adopt the "European Union Directives"
Note: The information below applies only to machines that have the CE mark on the PIN plate.The declared dynamic operator sound pressure level is 71 dB(A) for machines with serial number prefix (S/N: N9Y) and (S/N: N9A) and 72 dB(A) for machines with serial number prefix (S/N: E9Y) and (S/N: E9W) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The declared exterior sound power level is 109 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in "ISO 6395:2008". The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling speeds. "The European Union Physical Agents (Vibration) Directive 2002/44/EC"
Vibration Data for Motor Graders
Information Concerning Hand/Arm Vibration Level
When the machine is operated according to the intended use, the hand/arm vibration of this machine is below 2.5 m/s2.Information Concerning Whole Body Vibration Level
This section provides vibration data and a method for estimating the vibration level for motor graders.The expected vibration levels can be estimated with the information in Table 1 in order to calculate the daily vibration exposure. A simple evaluation of the machine application can be used. For typical operating conditions, use the average vibration levels as the estimated level. With an experienced operator and smooth terrain, subtract the Scenario Factors from the average vibration level in order to obtain the estimated vibration level. For aggressive operations and severe terrain, add the Scenario Factors to the average vibration level in order to obtain the estimated vibration level.
Table 1
"ISO Reference Table A - Equivalent vibration levels of
Caterpillar SIS machinery equipment:
Parts roller Caterpillar catalog:
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L, 318E L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D2, 320D2 GC, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 325D, 329D ...
311, 311B, 311C, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320B L, 32...
320D, 320E, 320E RR
2979317
ROLLER AR-TRACK & CARRIER
320E, 320E RR
320E, 320E RR
2979318
ROLLER AR-TRACK & CARRIER
320E, 320E RR
320E, 320E RR
8E5032
ROLLER & BEARING AS
311, 311B, 311C, 312, 312B, 313D2 LGP, 315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C...
311, 311B, 311C, 312, 312B, 313D2 LGP, 315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C...
8E5602
ROLLER & BEARING AS
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319D L, 319D LN, 320C, ...
3605865
ROLLER & BEARING AS
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L, 318E L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D2, 320D2 GC, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 325D, 329D ...
313D2 LGP, 315D L, 316E L, 318D L, 318D2 L, 318E L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D2, 320D2 GC, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 325D, 329D ...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
2093313
ROLLER & BEARING AS
320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D2, 320E L, 320E LRR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D2, 320E L, 320E LRR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
5Q3215
ROLLER & BEARING AS
320B L, 320C, 320D, 320E, 320E RR
320B L, 320C, 320D, 320E, 320E RR
3577557
ROLLER AR-TRACK & CARRIER
320E L, 320E LRR, 323E L
320E L, 320E LRR, 323E L
2979298
ROLLER AR-TRACK & CARRIER
323D SA, 323E L
323D SA, 323E L
2979277
ROLLER AR-TRACK & CARRIER
329D, 329D L, 329E
329D, 329D L, 329E
2979318
ROLLER AR-TRACK & CARRIER
320E, 320E RR
320E, 320E RR
2979317
ROLLER AR-TRACK & CARRIER
320E, 320E RR
320E, 320E RR
3995056
ROLLER GP-TRACK-DOUBLE FLANGE
349D L, 349E
349D L, 349E