ROLLER GP-SFLG 4999026 - Caterpillar

Removal Procedure
Start By:
Release hydraulic system pressure.
Remove the cab.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02884942
Disconnect hose assembly (2) and (3) from secondary steering valve (1) .
Illustration 2 g02887516
Disconnect hose assemblies (4) and (6) from secondary steering valve (1) .
Disconnect bracket (5), and disconnect harness assemblies (7) from secondary steering valve (1) .
Remove bolts (8) and secondary steering valve (1) .Installation Procedure
Install secondary steering control valve (1) in the reverse order of removal.