ROLLER GP-TRACK CARRIER 6K9879 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00589930
Remove eight bolts (1) and guard (2).
Illustration 2 g00589939
Remove two bolts (5).
Install two 1"-14 NF x 11" (280 mm) guide bolts (3).
Install Tool (A) and attach a suitable lifting device.
Remove the remaining bolts (5).
Remove vibration damper (4). The damper weighs approximately 91 kg (200 lb).
Remove bolts (6) and remove the adapter from vibration damper (2), if necessary. The adapter weighs approximately 34 kg (75 lb). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the adapter was removed, install the adapter with bolts (6). Tighten the bolts to a torque 100 15 N m (75 10 lb ft).
Illustration 3 g00589939
Install Tool (A) and attach a suitable lifting device.
Apply 4C-5593 Anti-Seize Compound to the threads of the bolts.
Position vibration damper (4) on the engine and install four bolts (5).
Remove the two guide bolts (3).
Install two remaining bolts (5). Tighten the bolts to a torque of 1125 100 N m (830 75 lb ft). Note: Refer to the Specifications Module, "Vibration Damper" for more information.
Illustration 4 g00589930
Install guard (2) and eight bolts (1). Tighten the bolts to a torque of 15 3 N m (11 2 lb ft).