6Y8080 ROLLER GP-TRACK CARRIER Caterpillar parts
325 L, 325 LN
Rating:
Alternative (cross code) number:
CA6Y8080
6Y-8080
6Y8080
CA6Y8080
6Y-8080
6Y8080
Weight: 56 pounds 25 kg.
EXCAVATOR,
Number on catalog scheme:
2
For full view, you need register
Information:
Illustration 1 g01209193The Product Identification Number (PIN) for the machine is located on the left-hand side of the machine. Plate will have the following information:Note: The letter "Z" may be stamped in the block that is identified as "Parts Order". This block is located on the plate for the Product Identification Number (PIN). This stamp indicates some customization to the machine which will require special handling when parts are ordered.
Illustration 2 g02436556Model number (A)____________________Product Identification Number (B)____________________Service Information Plate (C)____________________Year of Manufacture Plate (If Required) (D)____________________CE Plate (If Required) (E)____________________Country of Origin Info Plate (If Required) (F)____________________Note: Local regulations may require documentation of Year of Manufacture in the Operation and Maintenance Manual. Please comply with these regulations.
Illustration 3 g01209191Transmission Serial Number ____________________
Illustration 4 g01209195Engine Serial Number ____________________Product Link
If equipped, this message is used to verify the certification of the Product Link as an RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Table 1
Operating frequency range 148 to 150 MHz
Transmitter power 5-10 w This message is located on the control group for the Product Link. The control group is located on the top of the cab.
Illustration 5 g01261742
This machine is equipped with a Caterpillar Product Link communication device. When electric detonators are used, this communication device should be deactivated within 12 m (40 ft) of a blast site for satellite-based systems and within 3 m (10 ft) of a blast site for cellular based systems, or within the distance mandated under applicable legal requirements. Failure to do so could cause interference with blasting operations and result in serious injury or death.In cases where the type of Product Link module cannot be identified, Caterpillar recommends that the device be disabled no less than 12 m (40 ft) from the blast perimeter.
If the machine is required to work within 12 m (40 ft) of a blast area, power to the Product Link module must be disconnected.Consult your Cat dealer with any questions that concern the operation of the Product Link in a specific country.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts roller Caterpillar catalog:
1402455
ROLLER GP-TRACK-SINGLE FLANGE
322B L, 325 LN, 325B L
322B L, 325 LN, 325B L
7Y0724
ROLLER AR-TRACK & CARRIER
325, 325 FM L, 325 L, 325 LN, 325B, 325B L, OEMS
325, 325 FM L, 325 L, 325 LN, 325B, 325B L, OEMS
7Y0362
ROLLER AR-TRACK & CARRIER
320 L, 320B, 320C, 325, 325 L, 325 LN, 325B, 325C, 325D, 325D L, 329D, 329D L, OEMS
320 L, 320B, 320C, 325, 325 L, 325 LN, 325B, 325C, 325D, 325D L, 329D, 329D L, OEMS
6Y1057
ROLLER GP-TRACK
320 L, 322 FM L, 325, 325 FM L, 325 L, 325 LN, OEMS
320 L, 322 FM L, 325, 325 FM L, 325 L, 325 LN, OEMS
320 L, 320B, 320C, 323D LN, 323D SA, 325, 325 FM L, 325 L, 325 LN, 325B, 325B L, 325C, 325C L, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L,...
320B, 322 FM L, 322B L, 325, 325 FM L, 325 LN, 325B, 325B L, OEMS
322 FM L, 322B L, 325 FM L, 325 L, 325B L
6Y1056
ROLLER & BEARING AS
2290, 2390, 2391, 320B, 320C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 FM L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 33...
2290, 2390, 2391, 320B, 320C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 FM L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 33...
6Y9859
ROLLER & BEARING AS
320B, 320C, 323D LN, 323D SA, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 330, 330 FM L, 330 L, 330B L, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN...
320B, 320C, 323D LN, 323D SA, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 330, 330 FM L, 330 L, 330B L, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN...
4I3049
ROLLER
325, 325 LN
325, 325 LN
0940898
ROLLER
325 L, E110, E120, E140, E180, E240, E300, E450, E650, E70
325 L, E110, E120, E140, E180, E240, E300, E450, E650, E70
6Y8073
ROLLER & BEARING AS
325 LN
325 LN
1258129
ROLLER GP-TRACK-DOUBLE FLANGE
D5H, D5H XL
D5H, D5H XL
8E0786
ROLLER AR
D7H
D7H
215C, 219D, 225D
8E4612
ROLLER GP-TRACK-SINGLE FLANGE
215C, 219D, 225D
215C, 219D, 225D
1059228
ROLLER AR-TRACK & CARRIER
330, 330 FM L, 330 L, 330B L
330, 330 FM L, 330 L, 330B L
1524130
ROLLER GP-TRACK-SINGLE FLANGE
375, 375 L, 5080
375, 375 L, 5080
1430367
ROLLER GP-TRACK-SINGLE FLANGE
375, 375 L, 5080
375, 375 L, 5080
6Y8124
ROLLER GP-TRACK-SINGLE FLANGE
375, 375 L
375, 375 L
322 FM L, 322B L, 325 FM L, 325 L, 325B L
320 L, 320B