ROLLER 7F7713 - Caterpillar

1. Raise loader arms until the broom is slightly elevated and level with the ground.2. Lower and secure the broom parking supports in their lower storage position.3. Put the diverter valve in the "Coupler" position and disengage the coupler locking pins. The brush can be deformed if the supports are not used when the broom is parked.4. Lower the loader arms and put the broom on the ground.5. Disconnect the broom wiring connector from the carrier machine's wiring harness.6. Disconnect the broom hydraulic lines.7. Disengage coupler and carrier machine. When disconnecting the broom from the carrier machine, the coupler locking pins must be released before the broom is lowered to the ground! Neglecting this may cause damage to the brooms suspension system.