ROLLER ASSEM. 7G5289 - Caterpillar

Illustration 13 g00590729
Remove three head bolts (18) and the washers.
Illustration 14 g00590730
Do not damage the machined surface of the barrel assembly. Damage to the machined surface of the barrel assembly will cause pump failure.
Remove the barrel assembly, the shaft, and the camshaft from body (12) .
If necessary, remove two dowels (19) .
Illustration 15 g00590733
Tap seal retainer (20) lightly with a hammer from the inside of body (12). Remove seal retainer (20) from body (12) .
Illustration 16 g00590737
Use a hammer and a drift to remove two lip seals (21) and the O-ring seals.
Remove two O-ring seals (22) from seal retainer (20) .
Illustration 17 g00590739
Remove shaft (23) .
Illustration 18 g00590741
Position shaft (23) in a suitable press in order to remove roller bearing cone (24). Remove roller bearing cone (24) .
Illustration 19 g00590743
Remove eight locking bolts (27) and the hard washers in order to remove two plate bearings (28) and the shims from camshaft (25). Remove two plate bearings (28) .
If necessary, remove dowel (26) .
Illustration 20 g00590772
Remove wear plate (30) and the dowel from camshaft (25) .
Illustration 21 g00590774
Remove nine piston assemblies (31) from barrel assembly (29). Remove retraction plate (32) .
Illustration 22 g00590776
Illustration 23 g00590777
Use a suitable press and Tool (D) in order to hold spring (34) in compression.
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tool (D) in order to remove retaining ring (35) .
Slowly release the compression on spring (34) .
Remove the following items from barrel (29) : spring (34), two spring spacers (33) and retaining ring (35) .
Illustration 24 g00590779
Illustration 25 g00590782
Use Tooling (E) to remove roller bearing cup (36) from body (12) .