ROLLER & SHAFT ASSEM. (SINGLE FLANGE) 7M5113 - Caterpillar

Which Generate This Code:Note: This code only applies to Series G-Series Track-Type Tractors.The parameter was modified with an incorrect value.This diagnostic code occurs when the valve drive command for extend is greater than the max drive.Note: The max drive is some value near 75% of the system voltage.Test Step 1. RECALIBRATE THE VALVE
Restart the procedure for the valve calibration. Refer to Systems Operation, Troubleshooting, Testing and Adjusting, "Bank valve (Grade Control) - Calibrate"Expected Result:Recalibration causes the "VM 17 Valve Drive Failure" code to become inactive.Results:
YES - Recalibration causes the "VM 17 Valve Drive Failure" code to become inactive.Repair: Return the machine to normal operation.STOP
NO - Recalibration does not cause the "VM 17 Valve Drive Failure" code to become inactive.Repair: It is unlikely that the parameter has been changed. Contact your Technical communicator for a possible consultation with Caterpillar.STOP