7T0687 ROLLER GP-TRACK-DOUBLE FLANGE Caterpillar parts
D10N, D9L
Rating:
Alternative (cross code) number:
CA7T0687
7T-0687
7T0687
CA7T0687
7T-0687
7T0687
Weight: 323 pounds 146 kg.
TRACK-TYPE TRACTOR,
Number on catalog scheme:
For full view, you need register
Information:
Illustration 1 g02775516
Table 1
Specification for 283-6118 Bucket Cylinder Gp
Item Qty Part Specification Description
1 1 099-0600 Ring Before assembly, apply red Loctite 596 to the hole.
2 1 114-0754 Bushing Outside diameter is 70.120 0.025 mm (2.7606 0.0010 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
3 1 170-9840 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
4 1 170-9856 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
5 1 165-9282 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
6 - - Before assembly, apply green Loctite 609 to the wiper seal groove.
7 1 143-8149 Special Locknut Before assembly, lubricate the face and the threads with 248-7522 Hydraulic Oil.
Torque to 3100 160 N m (2286 118 lb ft).
8 2 143-8024 Ring Lubricate the inside diameter and the outside diameter with clean grease.
9 1 9X-7298 Seal As Lubricate the inside diameter and the outside diameter with clean grease.
10 2 143-8033 Ring Lubricate the inside diameter and the outside diameter with clean grease.
11 2 143-8025 Ring Lubricate the inside diameter and the outside diameter with clean grease.
12 During the press fit, insert the bushing in the cap assembly with the tapered side first.
2 168-0019 Bushing Inside diameter before assembly is 60.13 0.02 mm (2.367 0.001 inch).
Installation depth is 7.35 0.50 mm (0.289 0.020 inch).
A 1 170-9938 Cylinder As Diameter is 100.00 0.10 mm (3.937 0.004 inch).
B 1 283-6119 Rod As Diameter is 64.93 0.03 mm (2.556 0.001 inch).
13 During the press fit, insert the bushing in the rod assembly with the tapered side first.
1 248-7857 Bushing Inside diameter before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 10.0 0.3 mm (0.39 0.01 inch).
C 1 099-0596 Head Bore of the head over two lands is 65.53 0.03 mm (2.580 0.001 inch).
14 Before using the machine for drilling operation, tighten the head.
Torque to 650 70 N m (479 52 lb ft).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts roller Caterpillar catalog:
517, 527, 561B, 561C, 561D, 561M, 571G, 572G, 572R, 578, 583K, 583R, 587R, 589, 931B, 931C, 933, 935B, 939, 941, 950, 955H, 955L, 977H, 977K, 977L, 983, 983B, D10, D10N, D11N, D3, D4D, D4E, D4E SR, D4...
118, 119, 128, 129, 227, 30, 57, 578, 58, 594H, 621, 621B, 623B, 627B, D10N, D10R, D346, D6F SR, D6G SR, D7E, D7E LGP, D7G, D7H, D7R, D8L, D8N, D8R, D9H, D9L, D9N
120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160G, 160H, 160H ES, 160H NA, 160K,...
7T1830
ROLLER & BEARING AS
589, D9L
589, D9L
3T6519
ROLLER
517, 527, 561H, 561M, 578, 583R, 587R, 589, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H, D9L, D9N, D9R
517, 527, 561H, 561M, 578, 583R, 587R, 589, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H, D9L, D9N, D9R
8P2933
ROLLER-CABLE GUIDE
D10N, D10R, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D6D, D6H, D6H XL, D6H XR, D7G, D7H, D8R, D9L
D10N, D10R, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D6D, D6H, D6H XL, D6H XR, D7G, D7H, D8R, D9L
6P3473
ROLLER ASSEM.
58, D10N, D10R, D6D, D7G, D7H, D9L, D9N, D9R
58, D10N, D10R, D6D, D7G, D7H, D9L, D9N, D9R
9P7452
ROLLER ASSEM.
58, D10N, D10R, D6D, D7G, D7H, D9L, D9N, D9R
58, D10N, D10R, D6D, D7G, D7H, D9L, D9N, D9R
6Y0892
ROLLER & BEARING AS
D10N, D10R
D10N, D10R
6Y0891
ROLLER & BEARING AS
D10N, D10R
D10N, D10R
7T0682
ROLLER GP-TRACK-SINGLE FLANGE
D10N, D9L
D10N, D9L
7T1831
ROLLER GP-TRACK-SINGLE FLANGE
589, D9L
589, D9L
589, D9L