ROLLER & BEARING GP 7T9192 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02237915
Fully open the hood. The water separator is located on the bottom of the primary fuel filter on the right side of the machine.
Open the drain valve on the bottom of the water separator bowl. Allow the water and the fuel to drain into a suitable container.
Close the drain valve.Note: The water separator is under suction during normal engine operation. Tighten the drain valve securely in order to prevent air leakage into the fuel system.
Fully close the hood.At start-up, the system will display the fluid levels for the engine oil, coolant, and the fuel filter water separator. Turn the key to the ON position. Wait while the system does the check. The display screen will display the results of each compartment.Note: If the key ON water separator check is performed every 10 service hours or daily, a water drain should still be done every 50 service hours or weekly.