8E4579 ROLLER GP-TRACK-SINGLE FLANGE Caterpillar parts
235C, 235D
Rating:
Alternative (cross code) number:
CA8E4579
8E-4579
8E4579
CA8E4579
8E-4579
8E4579
Weight: 113 pounds 51 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$581.29
26 Dec 2021
US: Florida-Parts-Z
1P9100 - Track Roller Group 1248250 2387861 8E4579 9W5586 1346636 4S9051 1181619
FIRST PRICE PARTS
FIRST PRICE PARTS
$210.00
06 Nov 2019
-: -
Caterpillar 8E4579 8E-4579 Roller Single Flange Cat Replacement Caterpillar 235C 235D
$263.44
12 Mar 2019
Unknown: Unknown
Caterpillar 8E4579 Roller G-Track New
For full view, you need register
8E4579
Images:
Information:
Remove Rocker Shafts And Push Rods
start by: a) remove valve covers
MARINE ENGINE1. Remove valve cover bases (2).
INDUSTRIAL ENGINE2. Remove inner fuel lines (1). Install protection caps on all fuel line openings.
MARINE ENGINE3. Remove three bolts (3) that hold rocker shaft assembly to cylinder head.4. Remove rocker shaft assembly (4).
INDUSTRIAL ENGINE5. Remove push rods (5) from valve lifters.6. Remove bridges (6) from dowels in cylinder head.Install Rocker Shafts And Push Rods
1. Put clean engine oil on the dowels for the bridges.
MARINE ENGINE2. Install the bridges (1) on dowels. Keep pressure by hand on the bridges and turn the adjustment screw clockwise until contact is made with valve stem. Turn the screw an extra 20° to 30°. This will make dowel straight in guide and make compensation for gap (slack) in the threads. Hold adjustment screw in this position and tighten locknut to a torque of 22 3 lb.ft. (28 4 N m).
INDUSTRIAL ENGINE
MARINE ENGINE3. Install the push rods (3).4. Install rocker shaft assembly (2).
INDUSTRIAL ENGINE5. Put clean engine oil on threads of cylinder head bolts. Install the bolts (4) that hold rocker shaft assembly and tighten the three bolts first to a torque of 200 20 lb.ft. (270 25 N m). Start with the bolt in center of rocker shaft. Tighten bolts again to a torque of 330 15 lb.ft. (450 20 N m). Tighten bolts again by hand to 330 15 lb.ft. (450 20 N m).6. Install inner fuel lines (5). Use tool (A) to tighten the fuel line nuts to a torque of 30 5 lb.ft. (40 7 N m).
Do not cause damage to the O-ring seals on the inner fuel lines.
7. Make adjustment of valves to get a clearance of .015 in. (0.38 mm) for intake, and .030 in. (0.76 mm) for exhaust.8. Install valve cover bases.end by:a) install valve covers
start by: a) remove valve covers
MARINE ENGINE1. Remove valve cover bases (2).
INDUSTRIAL ENGINE2. Remove inner fuel lines (1). Install protection caps on all fuel line openings.
MARINE ENGINE3. Remove three bolts (3) that hold rocker shaft assembly to cylinder head.4. Remove rocker shaft assembly (4).
INDUSTRIAL ENGINE5. Remove push rods (5) from valve lifters.6. Remove bridges (6) from dowels in cylinder head.Install Rocker Shafts And Push Rods
1. Put clean engine oil on the dowels for the bridges.
MARINE ENGINE2. Install the bridges (1) on dowels. Keep pressure by hand on the bridges and turn the adjustment screw clockwise until contact is made with valve stem. Turn the screw an extra 20° to 30°. This will make dowel straight in guide and make compensation for gap (slack) in the threads. Hold adjustment screw in this position and tighten locknut to a torque of 22 3 lb.ft. (28 4 N m).
INDUSTRIAL ENGINE
MARINE ENGINE3. Install the push rods (3).4. Install rocker shaft assembly (2).
INDUSTRIAL ENGINE5. Put clean engine oil on threads of cylinder head bolts. Install the bolts (4) that hold rocker shaft assembly and tighten the three bolts first to a torque of 200 20 lb.ft. (270 25 N m). Start with the bolt in center of rocker shaft. Tighten bolts again to a torque of 330 15 lb.ft. (450 20 N m). Tighten bolts again by hand to 330 15 lb.ft. (450 20 N m).6. Install inner fuel lines (5). Use tool (A) to tighten the fuel line nuts to a torque of 30 5 lb.ft. (40 7 N m).
Do not cause damage to the O-ring seals on the inner fuel lines.
7. Make adjustment of valves to get a clearance of .015 in. (0.38 mm) for intake, and .030 in. (0.76 mm) for exhaust.8. Install valve cover bases.end by:a) install valve covers
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts roller Caterpillar catalog:
7T6187
ROLLER GP-TRACK SINGLE FLANGE
235, 235B, 235C
235, 235B, 235C
235C, 235D, 973, D7H
8E4614
ROLLER GP-TRACK-SINGLE FLANGE
235C, 235D
235C, 235D
6C5835
ROLLER GP-TRACK
235C, 235D
235C, 235D
6C7710
ROLLER GP-TRACK
235C, 235D
235C, 235D
235, 235B, 235C, 235D, 571G, 572G, 572R, 572R II, 973, 973C, 977K, 977L, D7E, D7F, D7G, D7G2, D7H, D7R, D7R II, D7R XR
7T6396
ROLLER GP-TRACK SINGLE FLANGE
235, 235B, 235C
235, 235B, 235C
215, 215B, 215C, 215D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3306B, 3406B, D379B, D398, D399
235C, 973, D7H
963B, 963C, 963D, D6R, D6R II, D6R III, D6T
1091215
ROLLER GP-TRACK-SINGLE FLANGE
375, 375 L, 5080
375, 375 L, 5080
2154459
ROLLER GP-ELEVATOR CHAIN
615C, 623G, 623K, 623K LRC
615C, 623G, 623K, 623K LRC
1977638
ROLLER GP-TRACK-DOUBLE FLANGE
D8R, D8R II
D8R, D8R II
3204394
ROLLER GP-EJECTOR CARRIER
TS180, TS185, TS220, TS225
TS180, TS185, TS220, TS225
1258128
ROLLER GP-TRACK-SINGLE FLANGE
D5H, D5H XL
D5H, D5H XL