4426529 ROOF AS Caterpillar parts
988K
Rating:
Alternative (cross code) number:
CA4426529
442-6529
4426529
CA4426529
442-6529
4426529
Weight: 172 pounds 78 kg.
WHEEL LOADER,
Compatible equipment models: 4426529:
Information:
CONFIDENTIAL TIBU3658-00
TECHNICAL INFORMATION BULLETIN July 31, 2002
Vibratory Compactors(S) CB-214D (1TZ1-Up)
CB-224D (8RZ1-Up)
CB-225D (9FZ1-Up)
Component Code(s) 5070,5073,3213 SUBJECT: THE PARKING BRAKE IS ENGAGING WHILE THE MACHINE IS OPERATING WITH A LOW ENGINE RPM
PROBLEM: Some CB-214D, CB-224D, and CB-225D Asphalt Compactors may experience a low charge pressure. The low charge pressure may cause the parking brakes to engage while the machine is operating with a low engine rpm. The cause for this problem is currently under investigation.
Note: Not all machines are affected by this problem.
SOLUTION:
A minimum charge pressure of 250 PSI is required in order to release the parking brakes in the front propel motors and the rear propel motors. The charge pressure should not drop below 250 PSI during low engine idle speed. Adjust the charge pressure to a minimum of 250 PSI at low idle. The oil temperature should reach a minimum of 100 (F) degrees before you adjust the charge pressure. Also, the normal charge pressure is set for 290 PSI at high engine idle speed. The charge pressure should not exceed 330 PSI during high engine idle speed.
Note: The solution that is listed above is a temporary fix to the problem. A permanent solution is under investigation.
COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED
TECHNICAL INFORMATION BULLETIN July 31, 2002
Vibratory Compactors(S) CB-214D (1TZ1-Up)
CB-224D (8RZ1-Up)
CB-225D (9FZ1-Up)
Component Code(s) 5070,5073,3213 SUBJECT: THE PARKING BRAKE IS ENGAGING WHILE THE MACHINE IS OPERATING WITH A LOW ENGINE RPM
PROBLEM: Some CB-214D, CB-224D, and CB-225D Asphalt Compactors may experience a low charge pressure. The low charge pressure may cause the parking brakes to engage while the machine is operating with a low engine rpm. The cause for this problem is currently under investigation.
Note: Not all machines are affected by this problem.
SOLUTION:
A minimum charge pressure of 250 PSI is required in order to release the parking brakes in the front propel motors and the rear propel motors. The charge pressure should not drop below 250 PSI during low engine idle speed. Adjust the charge pressure to a minimum of 250 PSI at low idle. The oil temperature should reach a minimum of 100 (F) degrees before you adjust the charge pressure. Also, the normal charge pressure is set for 290 PSI at high engine idle speed. The charge pressure should not exceed 330 PSI during high engine idle speed.
Note: The solution that is listed above is a temporary fix to the problem. A permanent solution is under investigation.
COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED
Caterpillar parts catalog:
Parts roof Caterpillar catalog:
3813174
ROOF
950K, 962K, 966K, 972K, 980K, 980K HLG
950K, 962K, 966K, 972K, 980K, 980K HLG
1752763
ROOF
950G, 962G, 966G, 972G, 980G
950G, 962G, 966G, 972G, 980G
1071169
ROOF
824G, 825G, 826G, 950G, 980G, CB-434B
824G, 825G, 826G, 950G, 980G, CB-434B
4256504
ROOF AS-CAB
950K
950K
2549036
ROOF AS
988H
988H
3107218
ROOF AS
824H, 826H, 834H, 836H, 988H
824H, 826H, 834H, 836H, 988H
5U5274
ROOF COVER ASSEMBLY
D25C, D30C, D350C, D35C, D35HP, D400
D25C, D30C, D350C, D35C, D35HP, D400
8D5621
ROOF AS
773B, 777
773B, 777
2623886
ROOF AS
785B, 789B, 793B
785B, 789B, 793B
4361220
ROOF AS
966M XE, 972M XE
966M XE, 972M XE
3587862
ROOF
950 GC, 966M, 966M XE, 972M, 972M XE, 980M, 982M
950 GC, 966M, 966M XE, 972M, 972M XE, 980M, 982M
3535722
ROOF
950K, 962K
950K, 962K