ROPE ASSEM. 9D0152 - Caterpillar

Illustration 7 g02941096
LH side of tractor (W1) 6 mm (0.24 inch) fillet weld (C) 226 6 mm (8.9 0.24 inch)
On the LH side of the tractor, weld plate (5) to the inside of plate (1) 226 6 mm (8.9 0.24 inch) (C) from the rear of plate (1) using a 6 mm (0.24 inch) fillet weld (W1). Repeat for the RH side of the tractor with plate (2) .Plate Fabrication for LGP Machine
Illustration 8 g03206200
LH and RH Plate LGP Machine (A) 258.7 mm (10.19 inch) (B) 218.7 mm (8.61 inch) (C) 482 mm (19 inch) (D) 187.2 mm (7.37 inch) (E) 97.2 mm (3.83 inch) (F) 389.8 mm (15.35 inch) (G) 532.7 mm (20.97 inch)
Illustration 9 g03220097
LH and RH Plate LGP Machine (H) Radius 50 mm (1.97 inch) (J) 92.3 mm (3.63 inch) (K) Radius 100 mm (3.94 inch)
Use 12 mm (0.5 inch) thick plate steel to fabricate plate (3) and plate (4) as shown in Illustration 8 and Illustration 9.
Illustration 10 g03207701
LH Plate LGP Machine (L) 265.9 mm (10.47 inch) (M) 223.3 mm (8.79 inch) (N) 383.1 mm (15.08 inch) (P) 172.4 mm (6.79 inch) (Q) 87.9 mm (3.46 inch)
Bend plate (3) according to dimensions shown in Illustration 10.
Illustration 11 g03209201
RH Plate LGP Machine (R) 265.9 mm (10.47 inch) (S) 223.3 mm (8.79 inch) (T) 87.9 mm (3.46 inch) (U) 383.1 mm (15.08 inch) (V) 172.4 mm (6.79 inch)
Bend plate (4) according to dimensions shown in Illustration 11.Installation Procedure for LGP Machine
Table 4
Required Parts for LGP Machine    
Item     Qty     Part Number     Description    
3     1     N/A     LH Plate LGP Machine    
4     1     N/A     RH Plate LGP Machine    
5     2     7T-3337     Plate    
Illustration 12 g03216456
Top view of LH push arm (3) Plate (A) LH Push Arm (B) 10 2 mm (0.40 0.080 inch) (C) 604.6 2 mm (23.80 0.080 inch) (D) 69.2 2 mm (2.72 0.080 inch) (W2) 8 mm (0.32 inch) fillet weld
Weld plate (3) to the LH push arm (A) using an 8 mm (0.32 inch) fillet weld (W2). Plate (3) should be welded to push arm (A) according to the dimensions in Illustration 12.
Illustration 13 g03217456
Top view of LH push arm (3) Plate (5) 7T-3337 Plate (A) LH Push Arm (E) 235.3 2 mm (9.26 0.080 inch) (W1) 6 mm (0.24 inch) fillet weld
Weld plate (5) to the LH push arm (A) and the inside of plate (3) with a 6 mm (0.24 inch) fillet weld (W1) according to the dimensions in Illustration 13.
Illustration 14 g03217963
Top view of RH push arm (4) Plate (F) 603.3 2 mm (23.75 0.080 inch) (G) 10 2 mm (0.40 0.080 inch) (H) RH Push Arm (J) 69.2 2 mm (2.72 0.080 inch) (W2) 8 mm (0.32 inch) fillet weld
Weld plate (4) to the RH push arm (H) using an 8 mm (0.32 inch) fillet weld (W2). Plate