ROPS AS 5200091 - Caterpillar

5200091 ROPS AS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5200091
520-0091
5200091

Buy ROPS AS 5200091 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Auto 7 520-0091 ABS Wheel Speed Sensor - Rear Driver Side

$27.25

18 Mar 2023

Amazon.com

Auto 7 520-0091 ABS Wheel Speed Sensor - Rear Driver Side
Auto7 Original equipment quality parts for Hyundai, KIA and GM Daewoo vehicles without the original equipment price || All parts manufactured in South Korea, the same place the Korean cars they fit are manufactured || All parts meet strict quality standards to ensure the correct fit and function the first time || Over 70,000 parts available making virtually every part required to repair your vehicle available || 12 month/12,000 mile warranty

Number on catalog scheme:

Caterpillar 5200091 Parts scheme ROPS AS

For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01253344
Align bearings (12) in the body of engine oil pump (9). The bearing joints should be 45 15 degrees from the centerline of the bearing bores.
Use Tooling (A) and a suitable press to install bearings (12). The bearings must be 1.5 0.5 mm (0.06 0.02 inch) below the gear bore. The diameter of the bearings must be 31.811 0.013 mm (1.2524 0.0005 inch) after installation.
Illustration 2 g00591964
Replace gears (11) and the shaft assemblies, if necessary.
Illustration 3 g00591963
Install shaft assemblies (10) in engine oil pump (9).
Illustration 4 g01253345
Illustration 5 g00591962
Ensure that dowels (13) and (14) are installed in cover assembly (7) at a distance of 6.0 0.5 mm (0.24 0.02 inch) above the surface of the cover.
Use Tooling (A) and a suitable press to install bearings (8) in cover assembly (7) with the bearing joints in the correct position. The bearing joints should be 45 15 degrees from the centerline of the bearing bores.
Install cover assembly (7) on the engine oil pump.
Illustration 6 g01253349
Ensure that the pins in cover assembly (6) are installed at a distance of 6.0 1.0 mm (0.24 0.04 inch) above the surface of the cover.
Install the gasket and cover assembly (6) on the engine oil pump.
Illustration 7 g00591930
Illustration 8 g00591928
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place clean engine oil on valve spool (5). Install spring (4), gasket (3), cover (2), and bolts (1). End By:
Install the engine oil pump.