ROPS GP 6C7257 - Caterpillar

Make sure that the machine and all attachments are in the recommended servicing position. Install the swing lock pin and shut off the engine. Make sure that all personnel are clear of the attachment before the manual lever on the ball valve is moved. Changing the valve position may cause the attachment to move unexpectedly. Serious injury or death may result.
Center Pivot
Illustration 1 g01477456
The machine is shown in the servicing position.
Illustration 2 g01477515
Valve in the two-way flow position
Illustration 3 g01477517
Valve in the one-way flow positionUse the lever to turn the valve. Make sure that you fully turn the ball valve until the valve stops.In order to change the valve from two-way flow to one-way flow, turn the valve clockwise.In order to change the valve from one-way flow to two-way flow, turn the valve counterclockwise.Sideshift
Illustration 4 g01207652
The machine is shown in the servicing position.
Illustration 5 g01207654
Turn the valve into the position that is shown above in order to perform the following functions:
Extendable Stick Operation
Work tools that require one-way flowTurn the valve by 90 degrees in order to use work tools that require two-way flow.Note: Before turning the valve for two-way flow, you must pin the extendable stick.