ROTATING GP-MOTOR 1262045 - Caterpillar

start by:a) connection of anti-pivot link
Keep clear of machine when tooling (A) is put into position.
1. Put wood blocks behind the rear tires. Use the bucket of the machine to lift the front of the machine until the front tires are off the ground. Put tooling (A) in position under the frame as shown. 2. Fasten a hoist to the front tire and rim. Remove nuts (2). Remove front tire and rim (1) from the wheel assembly. The weight of the front tire and rim is 350 lb. (158 kg).Install Front Tires And Rims
1. Fasten a hoist to the tire and rim. Put front tire and rim (1) in position on the wheel assembly. Install the nuts that hold it. Tighten the nuts to a torque of 265 35 lb.ft. (360 47 N m).2. Use the bucket of the machine to lift the front of the machine. Remove tooling (A). Use the bucket of the machine to lower the front tires to the ground.end by:a) separation of anti-pivot link