ROTATING GP-MOTOR 1910579 - Caterpillar

1910579 ROTATING GP-MOTOR Caterpillar parts 973C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1910579
191-0579
1910579

Weight: 114 pounds 52 kg.

Buy ROTATING GP-MOTOR 1910579 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

10 Sep 2018

Keystone Industries GmbH: Keystone Indust

Keystone 1910579 Yeti Modeling Wax Giant with Inlet, Gray, Opaque
The wax giant has a stable base with the wax disc || The foam ring is for convenient removal of excess wax || The wax giant is made of high quality wax that has minimal shrinkage

Number on catalog scheme: 13

Caterpillar 1910579 Parts scheme ROTATING GP-MOTOR

For full view, you need register

Compatible equipment models: 1910579:

TRACK LOADER 973C Caterpillar

Information:

Illustration 1 g03701285
Table 1
Specification for 393-8025 Bucket Linkage Gp
Item Qty Part Specification Description
- All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to lubricate the bores for the pins.
1 2 8T-4131 Nut Torque to 325 40 N m (240 30 lb ft).
Position the nut (2) to the distance 0.0 to 1.0 mm (0.00 to 0.04 inch) past the end of the bolt. For locking, tighten the nut (1) against the nut (2).
2 2 8T-4131 Nut
3 1 186-5730 Pin Diameter is 79.850 0.040 mm (3.1437 0.0016 inch).
4 4 166-1494 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss.
5 2 244-4360 Bushing Inside diameter before assembly is 80.20 0.04 mm (3.158 0.002 inch).
Installation depth of the bushing is 8.4 0.8 mm (0.33 0.03 inch).
6 1 186-5732 Pin Diameter is 69.850 0.040 mm (2.7500 0.0016 inch).
7 2 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss.
8 2 228-5615 Bushing Inside diameter before assembly is 90.25 0.04 mm (3.553 0.002 inch).
Installation depth of the bushing is 9.5 0.2 mm (0.37 0.01 inch).
9 2 234-3931 Pin As Diameter is 89.85 0.04 mm (3.537 0.002 inch).
10 - - During assembly of the linkage group on machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick.