2473256 ROTATING GP-PUMP Caterpillar parts
CB-214E, CB-22
Rating:
Alternative (cross code) number:
CA2473256
247-3256
2473256
CA2473256
247-3256
2473256
Weight: 2 pounds 1 kg.
VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replacement Part for Starter Solenoid Relay for 50cc 70cc 110cc 125cc 3125B 3125R Fits for ATV Motor relpart#2473256
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one.
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one.
This part in 6 request:
Show.
This information for suppliers only!
2024-08-15
2023-07-30
2022-01-25
2021-05-11
2020-09-21
2020-06-08
Number on catalog scheme:
6
For full view, you need register
Information:
Start By:
Remove the counterweight cover. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".Note: SERVICE DATA: TOOLING (J ) THROUGH TOOLING (O) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines for installation purposes. Plug the lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00861602
Remove bolts (1) in order to remove panel (2). Panel (2) will allow access to the swivel motor.
Illustration 2 g00861607
Remove hose assemblies (3). Plug the hose assemblies.
Illustration 3 g00861637
Illustration 4 g00861641
Remove bolts (4) that secure swivel (5) to the undercarriage frame.
Illustration 5 g00861698
Illustration 6 g00861713
Install Tooling (A) through Tooling (G) in order to raise the carbody assembly of the machine.
Illustration 7 g00861784
Position the lifting straps and Tooling (G) on the front of the carbody assembly.
Illustration 8 g00861825
Install the lifting straps to the right side of the machine.
Illustration 9 g00861849
Remove bolts (6) that secure carbody assembly to the undercarriage.
Install Tooling (H) prior to raising the carbody assembly. Note: Tooling (H) can only be installed on the three rear holes.
Illustration 10 g00861886
Raise the carbody approximately 51 mm (2 inch)from the undercarriage frame. The weight of the carbody assembly is approximately 3357 kg (7400 lb).
Take note of the dowels (7) in the undercarriage frame.
Illustration 11 g00861840
Remove grease hose (8) from the fitting.
Raise the carbody assembly.
Remove the counterweight cover. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".Note: SERVICE DATA: TOOLING (J ) THROUGH TOOLING (O) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines for installation purposes. Plug the lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00861602
Remove bolts (1) in order to remove panel (2). Panel (2) will allow access to the swivel motor.
Illustration 2 g00861607
Remove hose assemblies (3). Plug the hose assemblies.
Illustration 3 g00861637
Illustration 4 g00861641
Remove bolts (4) that secure swivel (5) to the undercarriage frame.
Illustration 5 g00861698
Illustration 6 g00861713
Install Tooling (A) through Tooling (G) in order to raise the carbody assembly of the machine.
Illustration 7 g00861784
Position the lifting straps and Tooling (G) on the front of the carbody assembly.
Illustration 8 g00861825
Install the lifting straps to the right side of the machine.
Illustration 9 g00861849
Remove bolts (6) that secure carbody assembly to the undercarriage.
Install Tooling (H) prior to raising the carbody assembly. Note: Tooling (H) can only be installed on the three rear holes.
Illustration 10 g00861886
Raise the carbody approximately 51 mm (2 inch)from the undercarriage frame. The weight of the carbody assembly is approximately 3357 kg (7400 lb).
Take note of the dowels (7) in the undercarriage frame.
Illustration 11 g00861840
Remove grease hose (8) from the fitting.
Raise the carbody assembly.
Caterpillar parts catalog:
Parts rotating Caterpillar catalog:
1271902
ROTATING GP-MOTOR
AP-1055B, BG-2455C, CS-583
AP-1055B, BG-2455C, CS-583
1837372
ROTATING GP-PUMP
CS-573C, CS-583C
CS-573C, CS-583C
1079453
ROTATING GP-PUMP
CB-434B, CB-434C, CB-535B
CB-434B, CB-434C, CB-535B
1G8606
ROTATING GP-MOTOR
AP-1000, AP-800, AP-800C, AP-800D, BG-225B, CB-434, CB-434B, CB-434C, RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
AP-1000, AP-800, AP-800C, AP-800D, BG-225B, CB-434, CB-434B, CB-434C, RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
1272404
ROTATING GP
AP-1000, AP-1050
AP-1000, AP-1050
3844854
ROTATING GP-MOTOR
793F AC
793F AC
81010250
Rotating group assy.
CS-431, CS-433
CS-431, CS-433
0776753
ROTATING AS
CS-323
CS-323
0776573
ROTATING AS
CS-323
CS-323
2302513
ROTATING GP-MOTOR
5130B, 5230B
5130B, 5230B
2519564
ROTATING GP-PUMP
AP-655C
AP-655C