ROTATING GP-PUMP 2735073 - Caterpillar

Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Illustration 1 g03023056
Illustration 2 g03024416
Actual machine locations of lifting points and tie down points.
The right-hand tire and wheel assemblies are removed to enhance visibility.
(1) Rear lifting and tie down point
(2) Front tie down point
(3) Front lifting point
Improper lifting or tie-downs can allow the load to shift and cause injury or damage. Install the steering frame lock link before lifting.
Note: Do not use handles or steps in order to lift or tie down the machine.Note: The machine shipping weight that is listed is the weight of the most common configuration of the machine. If attachments have been installed on your machine, the weight of your machine and the center of gravity of your machine may vary.Reference: Refer to Operation and Maintenance Manual, "Specifications" for the dimensions and weight of the machine.
Lifting Point - In order to lift the machine, attach the lifting devices to the lifting points.
Tie Down Point - In order to tie down the machine, attach the tie-downs to the tie down points.Use properly rated cables and properly rated slings to lift the machine. Position the crane or the lifting device in order to lift the machine in a level position.The width of the spreader bar must be sufficient to prevent the lifting cables or the lifting straps from contacting the machine.
Engage the parking brake before you sling the machine and before you secure the machine with tie-downs.
Install the steering frame lock link prior to lifting the machine.
Illustration 3 g03024358
Right-hand rear lifting point and tie down point detail.
Right-hand rear tire and wheel assembly removed to enhance visibility.
Attach two lifting cables to the rear of the machine.