ROTATING GP-PUMP 5433688 - Caterpillar

Table 1
OP6-0 Setpoints (1) - Spare Input/Output Programming    
Setpoint    Name    Description    Range Of Value    Factory Default    
SP01     Spare Input 1 Active State     Input state used by the GSC+ to declare that a SP01 fault exists.     0 - active low
1 - active high     0    
SP02     Spare input 1 Response     GSC+ response to a SP01 fault.     0 - shutdown
1 - alarm     0    
SP03     Spare Input 1 Time Delay     Amount of time the GSC+ waits before responding to a SP1 fault.     0 to 250 seconds in increments of 1     0 seconds    
SP04     Spare Input 2 Active State     Input state used by the GSC+ to declare that a SP02 fault exists.     0 - active low
1 - active high     0    
SP05     Spare Input 2 Response     GSC+ response to a SP02 fault.     0 - shutdown
1 - alarm     0    
SP06     Spare Input 2 Time Delay     Amount of time the GSC+ waits before responding to a SP02 fault.     0 to 250 seconds in increments of 1     0    
SP07     Spare Input 3 Active State     Input state used by the GSC+ to declare that a SP03 fault exists.     0 - active low
1 - active high     0    
SP08     Spare Input 3 Response     GSC+ response to a SP03 fault.     0 - shutdown
1 - alarm     0    
SP09     Spare Input 3 Time Delay     Amount of time the GSC+ waits before responding to a SP03 fault.     0 to 250 seconds in increments of 1     0 seconds    
SP10     Spare Input 4 Active State     Input state used by the GSC+ to declare that a SP04 fault exist.     0 - active low
1 - active high     0    
SP11     Spare Input 4 Response     GSC+ response to a SP04 fault.     0 - shutdown
1 - alarm     0    
SP12     Spare Input 4 Time Delay     Amount of time the GSC+ waits before responding to a SP04 fault.     0 to 250 seconds in increments of 1     0 seconds    
SP13     Spare Output Response     GSC+ response to the spare output trigger condition.     0 - active low
1 - active high     0    
SP15     Spare Relay Output Response     GSC+ response to the spare relay trigger condition.     0 - relay inactive when triggered
1 - relay active when triggered     1    
SP14     Spare Output Trigger Condition     The condition used by the GSC+ to trigger the spare output trigger response.     0 - unused
1 - active SP01 fault (2)
2 - active SP02 fault (2)
3 - active SP03 fault (2)
4 - active SP04 fault (2)
5 - any combination of active SP01, SP02, SP03 or SP4 faults (2)
6 - any active shutdown fault (AL1 - AL14, SP01 - SP04, or CID FMI)
7 - any active alarm