ROTATOR GP-HYDRAULIC 1696060 - Caterpillar

Use the following Steps to order and install a new engine information plate.
1. Identify and order the appropriate product specific information plate through your normal part ordering system. The new engine information plate being ordered is the Engine Information Plate that mounts on the valve cover or air intake manifold. The new engine information plate should not be confused with the Engine Serial Number Plate mounted on the block. Engine Serial Number Plates can not be ordered, nor should they be modified in any way.2. When stamping information on the new plate, use 3.0 mm (.12 in) maximum block figures. After stamping the information on the new plate, flatten the plate. Install the new plate in place of the existing information plate or decal, or in the case of a lost plate/decal, in the same area as the original plate/decal. Completely clean the area where the new plate is to be installed. Use 8T-9021 Adhesive to install the new plate.3. OBTAINING INFORMATION FOR A LOST OR STOLEN PLATE:If a plate is being replaced because the original plate was lost or stolen, it will be necessary to access engine information from the Caterpillar Technical Marketing Information System (TMI). Prior to accessing this information, it will be necessary to obtain the engine serial number from the Engine Serial Number Plate located on the engine block.
4. Chart B lists the information that is required to complete the new plate and where to find that information.5. OBTAINING INFORMATION FOR A RERATED ENGINE:If an engine information plate is being replaced because of a rerated engine, all the information which remains the same (Serial Number, Engine Model, etc.) will have to be stamped on the new plate. The rerated information can be determined from the TMI (see PROCEDURE TO FIND INFORMATION TO RERATE). Then stamp the information on the new plate and install the new plate as instructed in Step 2.
PROCEDURE TO FIND INFORMATION TO RERATE
GKN404 TMI - Data Index [Hit Enter]Search Criteria [Type in "Perf"] [Hit Enter][Type "S"] in the desired selection, [Hit Enter]Inquire Option BSales Model [ ]Combustion Type [ ]Aspiration Type [ ]Aftercooler Type [ ]Certification Year [ ] Optional [Hit Enter]Info Co (07) [Hit Enter]This will display current ratings and new ratings. Then using the Serial Number, performance specification, and arrangement number, you will be able to identify parts and specifications that need to be changed. If the TMI information is not complete, call the appropriate (3100, 3200, etc.) Caterpillar Customer Value Analyst for assistance.