ROTOR AS 2365550 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Maintenance Section".
Illustration 1 g00830643
Typical example
Remove the coolant temperature switch (1) from the water temperature regulator housing (2).
Inspect the coolant temperature switch (1) for damage. If the coolant temperature switch is damaged, use a new part for replacement. For information on testing the coolant temperature switch for correct operation, refer to Testing and Adjusting, "Coolant Temperature Switch - Test". Removal Procedure (C0.5, and C0.7 Engines)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Maintenance Section".
Illustration 2 g01130270
Typical example
Remove the coolant temperature switch (1) from the water pump housing (2).
Inspect the coolant temperature switch (1) for damage. If the coolant temperature switch is damaged, use a new part for replacement. For information on testing the coolant temperature switch for correct operation, refer to Testing and Adjusting, "Coolant Temperature Switch - Test". Installation Procedure (C1.1/3011C, C1.5/3013C, C1.6, C2.2/3024C, and C2.2/3024CT Engines)
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3413 Pipe Sealant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00830643
Typical example
Note: If a used coolant temperature switch is installed, apply a thin layer of Tooling (A) to the threads of the coolant temperature switch (1).
Install the coolant temperature switch (1) into the water temperature regulator housing. Tighten the coolant temperature switch (1) to a