ROTOR GP-GENERATOR 2548677 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     1    
Illustration 1 g00946093
Install Tooling (A), a nylon strap and a suitable lifting device to the engine.
Raise the engine approximately 25 mm (1 inch) above the engine mounts. Note: Do not allow the engine fan to damage the fan guard or the radiator.
Illustration 2 g00976431
Position engine support (2) on the engine block.
Install bolts (1) .
The engine support bracket on the left side of the engine can be accessed under the machine.End By:
Install the engine mount's (front). Refer to Disassembly and Assembly, "Engine Mounts (front) - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".